Search results

  1. WebMonkey

    Bumper Gaurds

    YES, if the OP passes, you have a deal with me. :)
  2. WebMonkey

    Bumper Gaurds

    i'm trying to find an affordable set for my truck as well. good luck!
  3. WebMonkey

    parking brake cable help wanted

    thanks. that was my thoughts as to how it should be. i'll have to track them down :)
  4. WebMonkey

    what is this interior cab area called?

    you guys are right about the trashed level. i'm basing my assessment on my level of metal working competency. around a negative 2, at present. :)
  5. WebMonkey

    what is this interior cab area called?

    thanks for the answers! will be able to buy the right metal now. :)
  6. WebMonkey

    vinyl floor replacement help/opinions wanted

    qsl, i found a more affordable 'brand' than the lmc dynamat style product. i will definitely be using some form of dynamat to lay the jute/vinyl over. thanks!
  7. WebMonkey

    What have you done to your square lately??

    after church i pulled the '85 k20 out of the 'barn' and hosed off the engine compartment. can't tell that i did (3 buckets of degreaser to boot). i got the bench seat out and pulled the old rubber?/vinyl? floor out. found all the surprise packages of rot that need attention. ;)
  8. WebMonkey

    what is this part in the engine compartment?

    yeah, i've been honest about not being too bright: module, air injection. 14087500 CASCO 50703 thanks for the hint. (facepalm)
  9. WebMonkey

    parking brake cable help wanted

    sorry i forgot to take a picture. 1985 k20 13" brake drums. does the armored parking brake cable 'lock' into the brake shield/plate or does it just pass through the hole without 'mounting'? my cables pass freely through the brake shield/plate hole. thanks for your help yet again.
  10. WebMonkey

    what is this part in the engine compartment?

    1985 k20 m code engine, manual transmission. what is this? thanks for the help, again. ;)
  11. WebMonkey

    what is this interior cab area called?

    so, i got the bench seat out of the '85 k20 today and ripped out the rubber?/vinyl? flooring. i knew there was rot and now i need to know what the 'vertical' area is called. is it footwell, that i'm looking for? or kick panel? not the floor pan, i'm pretty slow but i got that one figured...
  12. WebMonkey

    vinyl floor replacement help/opinions wanted

    thanks all. this has alleviated some of my hesitance with replacing the flooring. i don't think i want to spend the extra on the 'dynamat' though. it cost as much as the flooring!
  13. WebMonkey

    vinyl floor replacement help/opinions wanted

    http://store.73-87chevytrucks.com/merchant2/merchant.mvc?Screen=PROD&Store_Code=7&Product_Code=ACC-VNL&Category_Code=FLRNG i found that from the suggestion above. look pretty good :)
  14. WebMonkey

    vinyl floor replacement help/opinions wanted

    my 85 k20 has a vinyl floor in it, it needs replacing. it looks to have a backing or padding. i have an LMC catalog but i'm not sure what they offer is what i have/want. has anyone replaced a factory vinyl floor with aftermarket? if so, what did you use and where did you get it? :) i'm 99%...
  15. WebMonkey

    vacuum valve on driver's exhaust manifold outlet?

    thanks for the quick response. i had read something like that but couldn't wrap my head how it could figure out how to 'flow' from the driver's side to the passenger side without another valve of some kind up near the engine. :) now, i guess i have yet another vacuum line to figure out where...
  16. WebMonkey

    vacuum valve on driver's exhaust manifold outlet?

    google didn't answer my question so i'll ask here: sorry i didn't take a picture. crawling under the 1985 k20 to trace a 'line', i found it attached to a vacuum operated valve at the end of the driver's side exhaust manifold. it is right at the junction of the exhaust pipe going back to the...
  17. WebMonkey

    Dash bezel interchange

    check the headlight switch area. wiper switch in the dash vs on the turn signal stalk. check for a/c vent in the bezel vs no a/c vent. good luck!
  18. WebMonkey

    Allow myself to introduce......myself.

    you're right. they are readily available along with the coil/ballast combo. i was thinking a complete assembly in a faraday cage tucked in the tool box. along with a replacement alternator (fragile internal regulator). ;)
  19. WebMonkey

    Allow myself to introduce......myself.

    First, let me again say thanks to the responses concerning my newly acquired transfer case. Anyway, I've purchased an '85 k20 from my son that bought a newer truck and needed money. My thoughts were to create a daily driving emp resistant c.e.r.t. truck for s.e.r.e. purposes. yes, i'm being...
  20. WebMonkey

    np208 won't shift to neutral or 4 low

    thanks all. i've really jumped in the deep end. my shade tree mechanic experience has been with motorcycles. inline fours have been my wheelhouse. hopefully i can follow instructions with this much larger project and have good results as well. :)
  21. WebMonkey

    np208 won't shift to neutral or 4 low

    yes transmission stick 'free'/not engaged in any gear. i've tried motor running, motor off, clutching the transmission, as well as what i listed above. the transfer case stick moves toward neutral (stick pushed toward passenger door and moving down/back) but never makes it to neutral.
  22. WebMonkey

    np208 won't shift to neutral or 4 low

    yes, transmission stick is free/not engaged in any gear. i've tried clutching while transfer case shifting also. the transfer case stick will move toward neutral (pushed to passenger door and down) but never makes it to neutral.
  23. WebMonkey

    np208 won't shift to neutral or 4 low

    thanks for the reply. i was afraid the case would need 'some work'. i don't think anything on the truck is going to be left untouched. 'preciate it. 'monkey
  24. WebMonkey

    np208 won't shift to neutral or 4 low

    hello all. 1985 k20 350 m code engine 4 spd manual np208 14 bolt semi float rear i bought this truck from my son, it gets worse every time i go out to the garage to 'work on it'. first problem i'd like some input on: 1) the transfer case refuses to 'go into' neutral (and therefore not...
View older results

Latest posts

Forum statistics

Threads
48,413
Posts
1,066,764
Members
42,791
Latest member
406chevy
Top