xm20k's latest activity
-
xm20k reacted to Doppleganger's post in the thread What have you done to your square lately?? with
Like.
Dont look like much but I found a great body shop that fixed my roof skin. I randomly found this place - stopped in and his name sounded... -
xm20k replied to the thread Chuck’s engine build thread!.Very nice! Now just don't forget to post a video of her when you get it running. :headbang:
-
xm20k reacted to Scruffy49's post in the thread Dropping my Stock '74 Stepper - Need Advice with Like.
You’re saving me a bunch of aggravation with this post… Rear is already flipped, shock relocators, Gabriel Load Assist shocks. Ordering...
-
I dont even think you read what posted or maybe misunderstood lol. If the 76cc heads he owns are used off the crate on this 383 it...
-
xm20k replied to the thread Free 383 for Blaze.My bad forgot he had the 76 cc heads and yes that would be the route I'd go add a summit roller for under 400 a set of link bar lifters...
-
xm20k replied to the thread Free 383 for Blaze.250+ duration is going to run like hell under 3k add 11:1 onto that and you have close to my 388 91-93 octane only and idling/driving...
-
xm20k replied to the thread Dropping my Stock '74 Stepper - Need Advice.Not a short box or a stepper however 26" tall tire up front a 28" tall tire in the rear 2.5" spindle up front and an axle flip. I had a...
-
-
I think Dave is right in there, I got 10.98. Any aftermarket head is better then thr 461 heads. They are a good head, most of the specks...
-
Two of the most important things that must match everything else in the engine, is the heads chamber volumn and runners cc, (160/195,)...
-
xm20k replied to the thread Free 383 for Blaze.Just an option. Upgraded version of your current head with a 72cc chamber setup for flat tappet with .490 lift, 2.02 valves, and...
-
Well, ladies and gentlemen, we have an engine. Let’s see if I get find some help to get it bolted in this week.
-
xm20k replied to the thread Free 383 for Blaze.It is currently 11:1 roughly. He needs to get down around 9.5-10:1 the bigger chamber will work unless he has about 1k in extra cash to...
-
xm20k replied to the thread Free 383 for Blaze.Just off a rough calculation with zero deck 64 cc head .30 over 383 and a rough estimate of gasket thickness and bore comes up 11..2 :1...
-
xm20k replied to the thread Who knows auto insurance? Ins outs loopholes.Liability only covers damage you cause to others and at a minimum at that. Also, without a sighted party to go after your screwed...
-
Got it bolted in...
