Recent content by roy c

  1. R

    MS to prop valve help

    Thanks for the response, Quick note I have the duel reservoir MC I looked inside both outlet's the front reservoir has a larger hole than the rear reservoir. so did the prop valve the top rear was larger than the top front indicating to me that the MC front goes to the prop valve top rear...
  2. R

    MS to prop valve help

    Finally thank you my MC does have 2 reservoirs smaller in the front which I assumed was for the rear brakes thanks again
  3. R

    MS to prop valve help

    there was no way it was all new
  4. R

    MS to prop valve help

    SIR regardless of the size (which by the way the sizes I have do not fit I have to remove the fitting and customize) that's why I'm asking does it matter if the fitting on the front of the MS goes on the front top fitting 1/2-20 of the prop valve. and the rear MS go on the rear prop valve...
  5. R

    MS to prop valve help

    thanks for the quick reply. the 1/2-20 does that go on the front fitting of the MS or the rear fitting?
  6. R

    MS to prop valve help

    What I mean was that there was a 1/4" line from MS to the prop valve and also a 3/16" line also I'm wondering if it matters which way they go on in terms of the front fitting of the MS or the rear fitting and where on the top of the prop valve do they go
  7. R

    MS to prop valve help

    So the front fitting of the ms goes to the rear fitting on the prop valve?
  8. R

    MS to prop valve help

    does it matter which way the lines from the master cylinder to the proportioning valve go I 'm customizing my lines and need a little help There is one line that is 1/4" the other 3/16 thanks roy
  9. R

    Hole Lotta Shakkin goin on

    all the time I changed the rotors and pads No change I'm getting 4 new Michelins in the morning see after that I have a feeling it something to do with the anti lock brake system those speed censors on the front spindles are effecting this
  10. R

    Hole Lotta Shakkin goin on

    on a 93 K2500 sub any input on what causes the front to dashboard to fell like its going to shake out the window replaced inner outer tie rods, front rotors pads calipers front hoses. could it be possible front anti-lock is going bad some times it kicks in when it (I feel shouldn't) I'm...
  11. R

    Please Help Got the shakes

    forgot to mention inner and outer tie rods are new ball joints are tight bushings also tight could the new rotors be warped
  12. R

    Please Help Got the shakes

    I have a 93 K2500 sub that I replaced the front rotors pads rear drums shoes bearings when I apply the brakes shakes very bad rotated tires same thing took drums and rotors back exchanged same problem new steering damper no change I have anti lock brakes and hydro boost any idea's I...
  13. R

    063 heads on tbi WHAT SAY YOU ??

    I was only going to change the heads and intake was wondering if it was durable keep the rest the same
  14. R

    063 heads on tbi WHAT SAY YOU ??

    its a tbi motor
  15. R

    063 heads on tbi WHAT SAY YOU ??

    I have a set of 063 vortec heads that I'm considering to put on my 350 tbi rebuild I also have the gm. intake I was wondering if its worth it or shouldn't even bother. also is there any other things I have to do. thanks to all Roy
See more

Latest posts

Forum statistics

Threads
42,256
Posts
912,366
Members
33,758
Latest member
adhkjashda
Top