Rickf's latest activity
-
Rickf replied to the thread Has anyone done this? Some ideas or tips could help..Maybe try to find a mid 80's school bus fiberglass tilt nose and copy the tilt mechanism. -
Rickf replied to the thread Side marker led lights dim when marker lights on.I haven't been able to find out what/who's bulbs I used and I don't have the truck any more. I kinda remember the bulbs had a built in...
-
Rickf replied to the thread Side marker led lights dim when marker lights on.My vote is for the wrong type of LED 194 bulbs. I had a similar issue and solved it with the "correct" LED's. :cheers:
-
Rickf reacted to AuroraGirl's post in the thread Side marker led lights dim when marker lights on with
Like.
what do you mean by DIM? you have no light or its barely lit? are you saying they are never fully bright? You may have gotten cheap... -
Rickf reacted to RiverRat4's post in the thread Side marker led lights dim when marker lights on with Like.
something Ive learned after throwing money at problems is always confirm your ground connections! Dimming lights under load sounds like...
-
About 10-15 psi in normal operation. Give it a try, but as opposed to "a three-legged stool never wobbles," a two-screwed cover...
-
Rickf replied to the thread DIY Door Panel Pockets.:cheers:
-
We (AMD) make nice ones, I have them on my truck. Like @Grit dog stated, they're malleable enough that they all fit fine with a little...
-
Rickf replied to the thread Dash coverlay 1978.It's been a while since I did my '74, but I kinda remember using a Dremel to expose the screw holes, then re-installed the dash pad.
-
Rickf reacted to legend57's post in the thread 5.7 back fires through carb but timing is good. with Like.
A leak down test is a good idea. That will help you know how well the rings and valves are sealing. If you have a valve that is...
-
Rickf reacted to RattleSnack's post in the thread 5.7 back fires through carb but timing is good. with Like.
Before you tear into it, maybe you could try this... Take the distributor cap off so you can see the rotor. Then, try to rock the...
-
having weird issues with your TBI? before getting out the parts cannon, follow this advice from the GM Drivability manual before you...
-
I wanted to get rid of the tv cable as I did not have good luck getting it setup correctly and two places I took it couldn’t dial it...
-
Need to fix that. Those are engine oil cooler lines. If one ruptures it's likely to kill the engine before you have a chance to shut it...
-
Rickf replied to the thread Electronic Trans Swap.Did you test fit with a torque converter in place? If so, maybe it wasn't fully seated.
