Matt69olds's latest activity
-
Matt69olds replied to the thread 1987 R10: TH400 to 200-4R swap (mostly wiring??).The computer won’t care if the kickdown wire is disconnected. Somewhere there is a switch on the carb or throttle that sends power to... -
Matt69olds replied to the thread 1987 R10: TH400 to 200-4R swap (mostly wiring??).Look up TCC wiring for a 700 swap. The TCC works and installs in basically the same way on a 200R4, the pressure switch is obviously in...
-
Matt69olds replied to the thread A Technical Comedy [Only After the Fact].Friend of mine locked his keys in the ignition in his Chevelle. He crawled under the car, pushed off the sheetmetal he had covering the...
-
Matt69olds replied to the thread Overheating 87 TBI.How hot does it actually get? Put a real gauge on it, and see what happens. You may be pleasantly surprised. When does it overheat...
-
Matt69olds replied to the thread Update on my Ignition Module failure!.Nope, you’re not nuts!!! I do the same thing. Unfortunately, my supply has almost vanished, and they aren’t in salvage yards anymore...
-
Matt69olds replied to the thread TH400 Yoke Bolt Came Out.Then you should be good.
-
Matt69olds replied to the thread TH400 Yoke Bolt Came Out.You need a washer also. It needs to fit well to the register inside the yoke. Technically, all the bolt does is keep the yoke in...
-
Matt69olds replied to the thread Column wiring harness need help.Here is a wiring diagram from a 87 G body, should be very close to what you need.
-
-
Matt69olds replied to the thread TH400 Yoke Bolt Came Out.I just tossed a handful of those bolts last week. Bummer. I would think as long as there is no other damage, replace the bolt, and...
-
Matt69olds replied to the thread Wiring Harness? Choosing one?.Agreed! Even if you’re starting from scratch, you could buy a couple good used harnesses and build one far cheaper.
-
Matt69olds replied to the thread Need help wiring power windows and door locks 83 K1500.If your referring to the relay I suggested, just about any GM car or truck 1990ish and newer will have one. Sometimes they are in the...
-
Matt69olds replied to the thread Truck cranks and starts and dies immediately.Since you have HEI, the BEST way to wire it is to find the original resistance wire and remove it. Then you can install a regular wire...
-
Matt69olds replied to the thread headlight/seat belt buzzer.I don’t remember the RPO code, but the blue chime module is the holy grail. That’s the one that doesn’t just sound an alarm, it has a...
-
Matt69olds replied to the thread 4l60 swap.What PCM does the truck have to control the LS? Before doing anything, make sure the PCM won’t control a transmission. If do, definitely...
-
Matt69olds replied to the thread Carb rebuilders?.John Herald Jr Ray Kleem there are several others on the Q-Jet Facebook page. I know Ray and Cliff worked together, I think Ray took...
