Recent content by Lowered87

  1. Lowered87

    Barn doors and door questions

    In the past you could get a squarebody without moldings. As well, 1980 was the last time most moldings were held on with screws. You can find this information in the LMC catalogs.
  2. Lowered87

    Barn doors and door questions

    You can make your door weather stripping tighter by using foam backing rod and silicone spray. Foam backer rod is a low cost product that comes in a large coil and is used to fill large gaps prior to chaulking. The silicone spray will make your weather strip slippery without hurting the rubber...
  3. Lowered87

    A little info about wrench sizes

    That is a spline socket which is different than 12 point, 8 point, 6 point, hex, torx, external torx, security torx, torx paralobe, torx-plus, torx ttap, blah, blah, blah. It never fails, the one tool I need is in the set that I do not have and I have a lot of different sets. I was working...
  4. Lowered87

    Kill switch which wire?

    For the 2WD guys that are lowered: Air out of the bags sitting on the frame rails and the compressor power is interrupted. Try to move a truck sitting on frame rails.
  5. Lowered87

    Kill switch which wire?

    https://americanautowire.com/products/anti-theft-relay-kit-500239?_pos=1&_sid=20a0ec734&_ss=r Part Number: 500239 $29 This relay kit disables the starter cranking circuit until a predetermined switch is activated. Attempts to start the car without activating the switch will sound the horn or...
  6. Lowered87

    Necessity is ??????? Study this pic

    Did you buy that from the ACME corp because that is some serious Wile E. Coyote and the Road Runner **** going on there. I am sure this is a slide in a safety meeting presentation when they speak about what not to do.
  7. Lowered87

    Factory Seats; Why do they suck?

    What transmission are you using that has a third lever?
  8. Lowered87

    Factory Seats; Why do they suck?

    Those seats are super nice looking. Are they leather? Were they expensive? They use the same bolt pattern? If I bought those seats my truck would triple in value.
  9. Lowered87

    Factory Seats; Why do they suck?

    Or did I get the idea wrong as you were setting up a "poo and drive" revolutionary device?
  10. Lowered87

    Factory Seats; Why do they suck?

    I had a test drive sitting on a square bale. not as bad as a 5 gallon pail.
  11. Lowered87

    Factory Seats; Why do they suck?

    I think they were the last bench seat that were mushy right from brand new. Seat design started to evolve in trucks in the early 90s. Really personal preference.
  12. Lowered87

    Dual Tank Switch Dilema

    This is from LMC Truck. You can download a free catalog that is like a parts explosion. There are 13 different types of #15. Items 16, 17 and 18 are determined by year and so are the wiring harnesses and tank switch. It is all one set depending on year, # of tanks, fuel type, fuel delivery...
  13. Lowered87

    Dual Tank Switch Dilema

    http://67-72chevytrucks.com/vboard/showthread.php?p=8152326 If you look at this link, there is so much stuff, you should have no problem understanding.
  14. Lowered87

    Questions about turning a Burb into a 4 door pickup

    So does it swing to the right on a door hinge?
  15. Lowered87

    Dual Tank Switch Dilema

    Usually the problem is the wrong switch, broken wires or bad ground from the sending unit to the frame. The worst is you are dropping your tanks or taking your bed off. It totally makes sense with a wiring diagram, the correct parts and being able to work on it properly. I have wasted so much...
See more

Latest posts

Forum statistics

Threads
42,052
Posts
907,993
Members
33,533
Latest member
trchno
Top