legopnuematic's latest activity
-
Ghost Wood ... it's there, think I'll like it .. -
This will work but if the joint is dry probably needs replacement.
-
legopnuematic reacted to Ricko1966's post in the thread Heavy miss / stumble at 1500+ RPM. with
Like.
Your not supposed to run the choke off of the ignition lead. -
legopnuematic reacted to Matt69olds's post in the thread Heavy miss / stumble at 1500+ RPM. with Like.
Does it have HEI? If so, temporarily disconnect the vacuum advance. If it improves or is solved, carefully inspect the tiny wires for...
-
legopnuematic replied to the thread What have you done to your square lately??.There are these diamond grit tweezers available for cleaning terminals like that: Might be a worthwhile investment to get your aid in...
-
-
legopnuematic reacted to Strick's post in the thread What have you done to your square lately?? with Like.
Well, I just got home from a trip to Wilmington NC. I rescued this "jewel" that had been ridden hard down East.
-
Well those blocks are bad!!! We're all going to die!Stay home everybody.
-
It looks to me like they are not working loose. It looks to me like they missed the center pin altogether during the install on both...
-
legopnuematic replied to the thread Harmonic balancer bolt torque specs.Behold, the 1984 service manual, available right here on the site 60ft lb for the center bolt, for the pulley bolts like 30-35ftlb if...
-
-
legopnuematic replied to the thread Old77’s GMT400 SWB 4x4 5-speed project/DD.What kind of drill bits are you using? A real (not hardware store) M42 HSCO (high speed cobalt) drill should be able to make its way...
-
legopnuematic reacted to Old77's post in the thread Old77’s GMT400 SWB 4x4 5-speed project/DD with Like.
Worked another 4 hours on them today. The upper is all but ready to install with the exception of one hole. It will NOT drill :mad: So...
-
No.
-
Seems I remember a tool that was used with a small hammer to "shock " the ball joint into accepting grease. Like a grease gun, hooked...
-
legopnuematic reacted to 78C10BigTen's post in the thread Old77’s GMT400 SWB 4x4 5-speed project/DD with Like.
4.5 is about where its at currently....
