hey mister's latest activity
-
hey mister replied to the thread A Technical Comedy [Only After the Fact].My first thought was to just pinch the fuel line from the tank. As for the window crank... Just slip the edge of a shop rag in between... -
hey mister replied to the thread Rear oil pan seals too long?.I will do without before I order from ama$on. But, that's just me.
-
hey mister replied to the thread Need a breather for my 1987 7.4L "N", ideas?.Bummer... I have 3 pullapart yards within 45 minutes of me.
-
hey mister replied to the thread Any tricks to getting your SB doors to close easier?.PEX tubing cut to correct length... Fixed both my doors. Now they close with very little effort.
-
hey mister reacted to WFarm's post in the thread Any tricks to getting your SB doors to close easier? with
Like.
My drivers door has always been a PITA to close all the way. I hate slamming doors or anything else for that matter, but that’s what it... -
hey mister replied to the thread Need a breather for my 1987 7.4L "N", ideas?.I would go to a local pull-a-part and stroll the grounds. I woyld be looking for a close match in the "correct bends" category. You...
-
Everyone has their own way but I get all 6 from the bottom and support the engine so the distributor doesn't hit I do pop the cap off...
-
5-15-25 Summit Racing Demo Rack find. Lists for $104.99 Selling for $45 (+ actual shipping to 48 states) This is an Auto Metal Direct...
-
-
hey mister reacted to Turbo4whl's post in the thread Is anyone having any luck buying a vehicle from Craigslist/Facebook Marketplace right now? with Like.
I am not on Facebook for a lot of reasons. Like I said you need to be vigilant. Here is an example, If "Miss Jenny" is selling her dead...
-
hey mister replied to the thread Is anyone having any luck buying a vehicle from Craigslist/Facebook Marketplace right now?.In the newspaper days, it cost a few bucks to place an ad. The quality of the ad is proportionate to the cost to place it. I see so many...
-
hey mister replied to the thread Uneven rear main seal, help needed..Curious.... Do you have an indicator and a magnetic base.? If so, check the runout on the crank. New parts can be damaged in shipping.
-
I would pop that seal out and try a different brand.
-
hey mister posted the thread Front shocks still too squishy...help. in Suspension, Steering & Brakes.Shortly after I got the truck, I swapped out all the shocks with Monroe Gas Magnums. Granted it was much better, but the front end still...
-
hey mister replied to the thread AM/FM Radio.The issue with buying an old stock replacement is most likely the same issue you're having with the original. Some of the components in...
-
Here's a nice pair of Pioneer coaxials. Pulled from a pickup truck. Rarely do I ever find them withoit a screwdriver or hammer poked...
-
