fast 99's latest activity
-
fast 99 replied to the thread Do I restore my AC or?.Many old compressor front seals were designed to leak. Recharges were a fairly common yearly maintenance item. Can't blame the backyard... -
fast 99 replied to the thread 1987 Suburban R10 emissions problem due to modified intake.Is an under hood visual part of the emissions inspection? If all the vehicle needs is being lower than the limits an air pump and cat do...
-
fast 99 replied to the thread A/C REBUILD w/R-12.It's really not an issue using R12 just need the correct orifice tube, cycling switch and confirm correct oil is in compressor if any...
-
This... it took how many posts and responses before this detail came out?? This is why shops get defensive when the "ever since"...
-
fast 99 replied to the thread V2500 frame compatibility and advice..Flanges are top and bottom horizontal areas. Last frame I replaced used a forklift through the cab with doors off and 4 helpers on the...
-
fast 99 replied to the thread V2500 frame compatibility and advice..Guess repairing depends on how it's going to be used and how long you expect it to last. Any frames we repaired were for shorter periods...
-
fast 99 replied to the thread V2500 frame compatibility and advice..As someone who has dealt with bent and worn out frames, obviously best option is replacement. Depending on what is available in your...
-
fast 99 replied to the thread Front suspension mystery drone.Most of the time failed bearings can be located by running on a hoist or jack stands using a stethoscope.
-
fast 99 replied to the thread Why did GM do this???.Remember frames move and twist around A LOT.
-
On a stone stock 74 350. I'd save my money until ready to build an engine. If I was set on changing intake components right now,I'd be...
-
fast 99 replied to the thread SBC 400 intermittent lifter tick..Valve adjustment with hydraulic lifters 3/4 to 1 down turn from zero lash. With each valve closed loosen valve adjustment nut until...
-
fast 99 replied to the thread SBC 400 intermittent lifter tick..my 2 c Check valve adjustment first it's possible nut backed off or worn cam/valve train parts to near zero lash. If engine hasn't...
-
fast 99 replied to the thread SBC 400 intermittent lifter tick..aerated oil or bad lifter? Like most everything else today lifter quality has fallen.
-
fast 99 replied to the thread LE9 305 ESC backfires through exhaust on deceleration.No air injection tubes?
-
fast 99 replied to the thread How does this sort of thing happen????.........and use serrated starter bolts.
