Recent content by dirtriderdd

  1. D

    15 in wheels on 3/4 tons?

    I have 15x10 with 3.5" backspace and no rub.
  2. D

    Best mud tire?

    Mickey Thompson Bajs
  3. D

    Heat and Temperature Gauge

    My temp gauge stopped working. I replaced the sensor and thermostat (thought perhaps it was stuck closed). Still not working. I put a jumper wire from the line to the block and the gauge maxed out. So I believe the gauge is working. Coincidentally, my heat is not working. Could these...
  4. D

    vacuum hoses/lines/ports

    I'm trying to get a handle on all the vacuum ports and hoses. I'm getting a misfire and/or compression loss that I think is attributed to vacuum lines. Any help on how best to id where they all are and what is critical. David
  5. D

    Hard Brake Pedal

    Brakes were working fine all day yesterday. Then immediately upon start-up for my drive home the brake pedal went hard. I have brakes but completely unassisted. I have vacuum coming off the engine to the booster, but I don't know exactly what pressure. The brake pedal does not compress when...
  6. D

    Wider Profile / Stance 84 k10

    Thanks again VAL.
  7. D

    Wider Profile / Stance 84 k10

    VAL - thanks for the follow up. So 15x12 will definitely rub with a 4" lift?
  8. D

    Rim backspacing

    I'm trying for the same look. What size wheels did you end up with and what backspacing? Thx.
  9. D

    Lift and tire size

    what the wheel specs in the photo? I'm looking to get a wider stance. Currently running 35s on 15x10 with 4 inch backspacing. thanks
  10. D

    Wider Profile / Stance 84 k10

    My 84 k10 is running 35s on 15x10 wheels with 4 inches of back spacing and spacers on the rear end to square up the track with the front end. I'd like to get a slightly wider stance. Any suggestions on what size wheels to use to increase to widen the stance / profile? I love the look of the...
  11. D

    Aries Step Bars / Nerf Bars

    I just bought the Aries step bars for my 84 K10, part# 204040, from Real Truck; they sell the same set on LMC. I'm having trouble installing the rear brackets which mount to the rear spring hanger. Anyone have any experience in getting these installed or pics?
  12. D

    Brush Guard / Push Bar

    Thanks for all the responses. I went onto craigslist and bought one off a truck that was for sale. The guy sold me the push bar.
  13. D

    Brush Guard / Push Bar

    This request has been made several times over the past 10 years, but none of the suggested sites remain active or carry the product. I am searching for a brush guard or push bar for my 1984 K10. The tubular type that bolts directly into the bumper. Apparently LMC and JC Whitney used to carry...
See more

Latest posts

Forum statistics

Threads
42,128
Posts
909,755
Members
33,622
Latest member
timk
Top