If in fact my cam lobe is bad? Anyone have a recommendation on a good electric fuel pump at is dependable! And I’m guessing a fuel regulator? I’m planning for the bad news and hoping for something simple! And a warm spell to test that lobe….
The last time it ran it cut out and died! I put fuel in the line from the carb to fill the pump! It started and ran! A few miles down the road it happened again! Repeated , it started again and got me home! I’ve tried 3 different pumps and no fuel! I blew air in the line back to the tank and my...
Question everyone, shouldn’t fuel start coming out of my fuel line once it’s disconnected at the pump? I’m not getting fuel to my carb and I tried 3 different fuel pumps! Would my tank selector switch cause a problem with the thank selector valve ? I only have 1 tank I use due to a leak in the...
Ricko1966 , back story is it broke down in Feb lost all power and backfired. No spark , I replaced cap rotor and ignition module and got spark. Fired up and ran fine. Drove 4 miles I lost power and same happened but still have spark. I removed the fuel line to see if I wasn’t getting fuel! Sure...
I’m gonna try that, I bought 1 from orielly then 1 from Napa and still nothing all 3 meaning my original and 2 new look the same. I’m not sure what to look for when seeing the difference between sbc and bbc pumps
Hey everyone, I’m having issues with my fuel pump. 2nd pump installed and nothing happened! Ran lines to a can of gas and nothing. Rod from pump to cam looks good measured it and it’s exact length matched the specifications! I’m thinking I’ve got a bad cam lobe that’s worn out, only 126k on this...
Looking for advice, my 86 gmc sierra classic has had a check engine light coming on and off while driving? All gauges are good, nothing shows any indication of a problem. Any suggestions on where to start looking?
I’ve finally got my truck going smooth now, moving on to other things. Does anyone know if there is options on changing my dual exhaust from the muffler back to to run out the back instead of behind you he tires?
Question about a recent issue with loose bolts that connects the torque converter to the flex plate, 1 was loose. So loose that there was play enough to move the torque converter by hand just a little. Does anyone know the specific torque on those bolts? I’m not sure if tightening them and...
Loose bolts from flex plate to torque converter. Someone didn’t torque down the bolts? I’d love to have a discussion with the former owner, might have to message him on FB, the original owner has passed on.
Guys, I found a free motor and looking for identification on it, any ideas what I got? I'm thinking it's a 250 ci it's said to of come out of an 81' or 82 chevy c10.... any help would be appreciated....