Camar068's latest activity
-
Camar068 reacted to PrairieDrifter's post in the thread 4l60E ls swap k10 slips when turning with
Like.
Gotta be something in the valve body. I'm no transmission guy. How did it drive after the incident? The only other thing would be... -
Camar068 replied to the thread 4l60E ls swap k10 slips when turning.looks like I might be suckin air in at the diptstick tube seal. It's wobbly at the top (tube mount not secured to block) so I know the...
-
Bolts and rivets that move that shouldn't, usually develop a powdery rust ring around them, check for that. Check the engine crossmember...
-
Almost no room to get at the proportioning valve on mine!
-
Camar068 replied to the thread Can't get rid of play in the steering.My k10 was loose as hell because the pitman arm was not tight enough. I had installed it to torque and ran it for a year.....slop...
-
Camar068 replied to the thread Red head & ORD brace install.Mine is on a K10. Let me know if you've got a popping sound when u start up and crank the wheel the first time. Mine does that and I...
-
Camar068 replied to the thread 4l60E ls swap k10 slips when turning.This has been happening for about 4-5 years.
-
Camar068 replied to the thread 4l60E ls swap k10 slips when turning.sorry for edits....I try to do them quickly after posting.
-
While sitting at a light to turn left or right, if I get into it hard (under 4k rpm's) it will slip out of gear at times and just zing...
-
Camar068 reacted to Spider's post in the thread What have you done to your square lately?? with Like.
Made an attempt at detailing my interior. Pretty nasty, going to take a few scrubbings. I’m digging the bench seats. Need to order some...
-
Camar068 reacted to Spider's post in the thread What have you done to your square lately?? with Like.
picked up an 88 k20 Scottsdale and drove it 160 miles home through the mountains. Sm465 tbi 5.7, ran pretty darn well. Drives super...
-
Camar068 replied to the thread Good Ospho (phosphoric) and epoxy Test.I've used Ospho on my manifolds. These had surface rust on them (LS manifolds). Painted with high heat Rustoleum. Later they did...
-
Just a thought, if it’s using that much gas, and you are deleting the spare tire any way for a 40 gallon tank, you could go nuts and...
-
Camar068 replied to the thread Should i or shouldnt i?!!.Put it on a 4x4 long bed frame
-
Camar068 replied to the thread 1988 Camaro.ever heard of cryogenically freezing your blades? I've heard about it since the '90's. Aside from blades, there are test results out...
