Recent content by bluecamden85

  1. bluecamden85

    Rough country 2 in lift leafs

    When I installed the leaf springs rc in the rear ,I remember I was 1/4 in off from the 2 in. So 1 3/4. It fit the 49in holes. I replaced hangers in exact spot. And the front was a little off I can't remember exactly but I think it was 1/8 off from two inches. I went with rc 2 in cause of...
  2. bluecamden85

    Looks like no compression on 4,6,8

    If you're going to take valve springs off I would suggest the rope method. Might wanna change the valve seals too while your at it.
  3. bluecamden85

    What's this called part number?

    After watching several videos of YouTube on this. I'm the only one who has this damn piece of plastic in the hub go figure. Custom? Oh the first 4 lug nut I came across was probably torqued to 598 lbs. Damn socket wanted to slip off the nut, kinda like the scarecrow from wizard of oz walking for...
  4. bluecamden85

    What's this called part number?

    Replacing rotors and found this. Cam follower. Or is it supposed to be in two pieces? There's a tooth missing also. This is plastic it doesn't stick to a magnet. Anybody got a part number. 82 k15. It's a 10 bolt.
  5. bluecamden85

    Cicada noise 700r4?

    I was thinking that also. I only said solenoid cause it reminds me of a starter solenoid when the battery is dead. After work I'll go under and tighten everything.
  6. bluecamden85

    Cicada noise 700r4?

    I didn't notice it until I turned down the radio.lol. it may not be trans but it sounds like it's under me.
  7. bluecamden85

    Cicada noise 700r4?

    It only does it sometimes not Alot. I just figured out how to upload a video from YouTube. Yeah for me.
  8. bluecamden85

    Cicada noise 700r4?

  9. bluecamden85

    Cicada noise 700r4?

    Lol.
  10. bluecamden85

    Cicada noise 700r4?

    I gotta noise that sounds like a bug, a cicada I guess lol. It's a th700r. I imagine it's a solenoid. Noise only last few seconds. Any help ?
  11. bluecamden85

    Valve Spring Question Mark IV 454

    Not sure on cam and new springs but I recommend if u have umbrella seals to get all rubber. All I could find was hard plastic fel pro . Went to machine shop and they hook me up with all rubber. The originals were hard plastic and most were cracked with no top for valve guides.
  12. bluecamden85

    Smokes way to much?

    Update. Trucks not smoking drove around for about 30 min. And no smoking. Relieved. Happy happy. Just to put it out there but the valve spring compressor rent a tool at AutoZone and O'Reilly's was junk . Good ole harbor freight was great .
  13. bluecamden85

    Smokes way to much?

    It's grey smoke . pretty sure. I've just been kinda lazy on the choke. Cold weather. I was going threw some oil pretty fast. A quart or so every week just driving around the block few times. The valve seals about 7 or 8 didn't have the tops connected.
  14. bluecamden85

    Smokes way to much?

    I'll probably still do a compression test. I thought if it was rings the smoke would be black ? It runs good. Although it does take awhile to idle. electric choke. Holley.
  15. bluecamden85

    Smokes way to much?

    Didn't know any body commented on here till know. I changed the valve seals umbrellas. some seals where cracked everywhere they had no top to em. I think I had 3 out of the 16 that was in good shape. I'm guessing they were original cause they where all hard black seals. Went to machine shop and...
See more

Latest posts

Forum statistics

Threads
45,567
Posts
986,430
Members
38,657
Latest member
mick84
Top