Bennyt's latest activity
-
BBennyt replied to the thread Suggestions for replacing this?.Looks like you are in Phoenix, I'm on the westside. I have a couple of buckets of old parts. As soon as the sun goes down a bit, I'll...
-
BBennyt replied to the thread Tonneau cover recommendation.Wow, thanks Michael, I didn't know. Sucks as they were the only place for a lot of items. They had the highest quality side trim for our...
-
BBen, I hate to be the bearer of bad news but, Mar K went out of business. If somebody has that box you want in stock, grab it. 4/1/25...
-
BBennyt replied to the thread Tonneau cover recommendation.How secure does it need to be? What's the main purpose? Basically 2-3 different styles and 2-3 materials. Roll-up- flexible for loads...
-
-
BBennyt reacted to TotalyHucked's post in the thread Can't get rid of play in the steering with
Like.
It just depends on the usage of the truck. Especially at the rear, the later crossmember with holes in it will be fine for most trucks... -
BGot the kick panels installed and all the wires ran for the amp. Definitely not a direct fit, and drivers side had the challenge of the...
-
BI'd just push a piece of 6 in channel iron up against the frame rails in front of the sway bar drill 3 holes per side bolt it up, it...
-
BBennyt replied to the thread Can't get rid of play in the steering.Wow, didn't know they were that flexy those years! I'll have to take a closer look at one next time I see. I was actually going to use...
-
BBennyt replied to the thread Can't get rid of play in the steering.Not worth it unless you want the wow factor. The problem with the front cross member is that they are riveted. Remove the rivets and...
-
BBennyt replied to the thread Uneven rear main seal, help needed..I doubt crank is damaged or machined wrong and most likely just a bent/ damaged rear seal housing. I assume the crank turns over...
-
BFair enough. I’ve never had those failures, but I wouldn’t be happy if I did. I’m really surprised that a name brand bag would rupture...
-
BBennyt replied to the thread V2500 4in lift replacement? ORD?.When they work, they are great. But, I can't think of anyone I've ever met/ known that has had them work perfectly/ reliably from day of...
-
BBennyt replied to the thread What would you pay for this truck?.We cut my son's truck down but not totally sure I'd buy one already done unless I knew who did the work. A lot of them have z'd frames...
-
BLike this? Also a clue to where I live if you don’t look at my location on the left where yours says Miami…. I strongly considered...
-
BBennyt reacted to zulander's post in the thread 1985 1 Ton Dumptruck 11Ft bed with fold down sides,lots of new parts,receipts for all,chassis saver. $9,500 OBO with Like.
1985 1 Ton Dumptruck 11Ft bed with fold down sides,lots of new parts,receipts for all,chassis saver. New interior, everything under hood...
