-
-
Front: 18x8 with 245/45 and a 1.5" spacer Rear:18x9.5 275/40 and a 2" spacer Spacers are made by BORA @... -
I can do them by myself,no jack if they are empty. If you are using new tanks new straps new brackets leave the straps just barely...
-
I leave my hoses long and attached at the tank with clamps,with a second set of clamps loosely in place I pushup the tank,fish my hoses...
-
84_c10_GMC reacted to 77Dmax's post in the thread 1985 305 keeps dying after a few seconds with
Like.
The float is stuck open. Whack the side of the carb with a wrench. You should check the oil for gas also. -
84_c10_GMC reacted to TheHoundsman's post in the thread Searching for My Dad's 1979 Chevy Suburban with Like.
I ended up buying a 1979 Silverado (Dad’s was a Scottsdale) out of Texas originally from New Mexico so “relatively” rust free (couple of...
-
Keep it on the back. I've gotten dozens of damaged Humvee tires from Ft Bragg & have been fortunate that they were no real issues when...
-
I would have a real tire guy put a patch on the inside and glue the outside with that vulcanising glue they have. Also keep track of...
-
When you tune the system, the 6x9's and the subs should not be playing the same frequency's. The subs will be playing the deep stuff...
-
84_c10_GMC reacted to Randy and Easton's post in the thread Speaker pods/General stereo questions with Like.
Yeah he did it in doors and everywhere. But you’re right “what road noise”!
-
84_c10_GMC reacted to Randy and Easton's post in the thread Speaker pods/General stereo questions with Like.
@scenic760 , imagination and funds is the limit with this stuff. When Easton wanted to do stereo I took a backseat. He spent 1K on...
-
…
-
I removed the transmission so I could lower the 8.1 onto the motor mounts. Today I got the new flywheel new clutch and trans all bolted...
-
finally got the 8.1 in the truck
-
84_c10_GMC reacted to AuroraGirl's post in the thread Stock fuel pump has a vent line. Edelbrock don’t. with Like.
if you want to keep your return functionality, which i recommend, you can install this vertically installed off the pump-to-carburetor...
-
Hi Everyone! It's time for it to go - 1985 GMC, originally had a V-6/TH-400 but now has a locked-up 350 from the 70s in front of the...
-
-
Loading…
-
Loading…
