Hunter79764
Latest activity Postings About
-
-
Hunter79764 replied to the thread Free- 1987 C20 parts truck. Near Fort Worth Tx.I'm interested in some parts, i.e. wiring harness for the front end, but can't take the whole thing (my wife would kill me, and might go... -
Hunter79764 replied to the thread Under the Sheets. Supra MK3.I had a 91 Cressida with the 7M-GE. Great car, wish I wouldn't have sold it. 220k miles and 30 years old and the only thing that didn't...
-
Hunter79764 replied to the thread Ls swap.There's situations where that is possible, I couldn't say for sure one way or the other on this in particular. But that transmission...
-
Hunter79764 replied to the thread Ls swap.No issues with a 2wd vs 4wd engine, just the transmission. To convert the 4L60 in the Tahoe to a 4wd, it will need to have the output...
-
Hunter79764 replied to the thread Fix Slamming Doors - Striker Door Latch Repair.Does it seem like adjusting the door hinges might be an option? And/or replacing the pin bushings, if there is some play in the door? In...
-
Hunter79764 replied to the thread Scores from DIY Parts Yards, Pull A Part, U Pull It etc.I was at the yards looking for parts on my 2004 yukon and saw what looked to be a ~90 model Suburban. Entire front end, dash, front...
-
Hunter79764 reacted to Bextreme04's post in the thread Advice and Parts recommendations for some 6.2 cam/valvetrain work? with
Like.
I think the stock springs are only good to ~0.550. I said stock, but I meant the PAC or BTR beehive springs. They are good up to ~0.625... -
Hunter79764 replied to the thread Advice and Parts recommendations for some 6.2 cam/valvetrain work?.That's interesting on the stock springs. I might look closely at a new set of stock springs, and hang on to the stiff duals for another...
-
Hunter79764 reacted to Bextreme04's post in the thread Advice and Parts recommendations for some 6.2 cam/valvetrain work? with Like.
Yeah, I got the Stage 1 L92. Now they only have the Stage2 VVT and it is a second Generation of that cam with more lift. They no longer...
-
Hunter79764 replied to the thread Advice and Parts recommendations for some 6.2 cam/valvetrain work?.Not the update you're looking for, but it's the update I've got. Dad came in Friday afternoon (that's him standing in front of the...
-
-
Hunter79764 replied to the thread LS 5.3 High Idle.As for live data, the Torque app and a bluetooth adapter is a good option if you don't have HPTuners or similar. I don't have any other...
-
Hunter79764 replied to the thread 31x10.5 with 3:73 gears.700R4 trans. What RPM will I have at 70MPH?.https://spicerparts.com/calculators/transmission-ratio-rpm-calculator 2000 RPM is 71 MPH. Your exact tire will affect it of course, and...
-
Hunter79764 replied to the thread Advice and Parts recommendations for some 6.2 cam/valvetrain work?.I think I used Michigan Motorsports lifter and tray setup, but it was also right at the front end of Covid when everything was crazy, so...
-
Hunter79764 replied to the thread LS swap fuel system.On the newer stuff, you're right, they are much smarter and you gain a lot of flexibility. The earlier returnless was more what I was...
-
Hunter79764 replied to the thread LS swap fuel system.It is sort of a trade off cycle. Pump mounted external makes it easier to mess with wiring and/or change out, but it also makes it more...
-
-
Loading…
-
Loading…
