Dyl0116
Junior Member
- Joined
- Nov 12, 2012
- Posts
- 17
- Reaction score
- 5
- Location
- ONTARIO
- First Name
- Dyllenn
- Truck Year
- 1985
- Truck Model
- K10
- Engine Size
- 355
Ok so, this cluster f*** of a truck is driving me insane. First had no tail lights. So i wired them direct to switch to come on when switch is pulled. Then headlights/ running lights burnt out. I then changed the headlight switch and was back to normal. Now the truck has no dash lights, the oil and temp light on left side will not turn off (red) lights) and rest of lights don't work. When left signal is engaged, the signals outside the truck work, but inside they both flash as if hazards were engaged. When right signal light is triggered, again outside the truck it works, inside the truck it causes the fuel gauge to fluctuate. When turn of the key, the gas gauge drops an inch below E. What is going on, anyone else have issues similar. 1985 k10. I did change guage cluster as previous one the electrical circuit was a disaster.