-
-
cmichels83 replied to the thread Early 4.3 upgrade?.I have had good experiences with the 4.3 in the early 90s. Had a 1990 silverado and later a 92 GMC Sierra, both 2wd with the manual 5... -
cmichels83 replied to the thread old guy newbie.Welcome! I don't have a red two-tone, but here is a good site for getting parts. https://www.rockauto.com/
-
Hello Group, Retired FF here and old guy as well. I am just about to pull the trigger on an 81 swb, this will be my wife's truck and a...
-
cmichels83 replied to the thread 86 suburban 2wd to 4wd.Been a while since I did an update. Even though I bought the 2wd to 4wd conversion kit, we decided to do a frame swap instead. The 2wd...
-
-
cmichels83 replied to the thread Fuel gauge to tachometer, clock to fuel gauge.Glowshift sells a small one that will fit if you cut the whole for it. I replaced everything but the fuel gauge. Put the tach in the...
-
-
cmichels83 replied to the thread dash gauge bezel mods.I just posted about putting aftermarket gauges in stock bezel. Harder than I thought. Thread 'Aftermarket gauges in stock cluster'...
-
-
cmichels83 replied to the thread Aftermarket gauges in stock cluster.I cut the clear plastic lens to protect the needle on the fuel gauge. Broke more than one needle on those old gauges. Overall happy...
-
-
cmichels83 replied to the thread Aftermarket gauges in stock cluster.Wiring was something that I spent a good amount of time looking into before I started this project. Ended up buying the shop manuals...
-
-
cmichels83 replied to the thread Aftermarket gauges in stock cluster.I got Equus oil pressure, temp, and voltage meters, and decided to get a glowshift tach to fit in the spare spot in the cluster. Figured...
-
-
cmichels83 replied to the thread Aftermarket gauges in stock cluster.Here are the backs of the two speedometer gauges I have. After spending days/weeks reading forums on getting my speedometer to work and...
-
-
cmichels83 replied to the thread Aftermarket gauges in stock cluster.I test fit the old aftermarket gauges in my spare cluster, and it seemed like I would be able to make cheap aftermarket gauges work...
-
-
cmichels83 posted the thread Aftermarket gauges in stock cluster in Gauge, Speedo & Instrumentation.This is going to be a long post, so I will break it up a little bit. This past summer I finally got around to fixing my instrument...
-
-
cmichels83 replied to the thread fuel gauge reading.Yeah, I had a spare cluster and just took the fuel gauge out of that and plugged it into my cluster and it read the correct fuel level...
-
cmichels83 replied to the thread Need to replace rubber fuel lines on top of both tanks…..My mistake, you are right. I immediately thought about the hose I replaced and didn't think about the others.
-
cmichels83 replied to the thread Need to replace rubber fuel lines on top of both tanks…..I replaced the hose on my passenger tank without dropping it or removing the bed. I did it in my driveway this summer. Someone had cut a...
-
-
-
Loading…
-
Loading…
