What new tools have you got lately?

[Ricko1966]

I found a Milwaukee 18V LiOn Sawzall on the shoulder of 69 hiway,then about a week later I found a Milwaukee battery brand new still in the package in an intersection in O.P. Kansas. Just waiting to find a Milwaukee LiOn charger.

 

[Sad Sack]

I have a set of the squeeze handle strippers I got about 40 years ago. Stipped a lot of wire with them in that time, and they're still going strong.

I love squeezing strippers...

 

[Dejure]

EXCEPT the ones that bite.

 

[legopnuematic]

Snap on 3/16 combo wrench, my boss found two of them cleaning up his office and kept one and gave me the other.

You must be registered for see images attach

Got a few things at the current harbor freight sale.

You must be registered for see images attach

 

[Mr Clean]

I finally got my jack stand hangers powder coated. Also the dang inner net got me again. I got the Vevro socket holders... they are pretty nice. They do hold vertical with sockets in them.

 

[legopnuematic]

Flea market gets. $5 total.

You must be registered for see images attach

You must be registered for see images attach

 

[bucket]

Flea market gets. $5 total.

You must be registered for see images attach

You must be registered for see images attach

That nut driver set looks awfully familiar. I think my dad had one similar when I was a kid.

 

[DoubleDingo]

Kent Moore J-8763-1 Transmission Holding Fixture. Figure if I am going to tackle rebuilding my TH400 and 4L60E, may as well get the proper holding fixture to help in the rebuilding process.

Bought a J-6177 Differential Holding Fixture, but had to return it because it was too big for the HO52 differential.

 

[bucket]

Kent Moore J-8763-1 Transmission Holding Fixture. Figure if I am going to tackle rebuilding my TH400 and 4L60E, may as well get the proper holding fixture to help in the rebuilding process.

Bought a J-6177 Differential Holding Fixture, but had to return it because it was too big for the HO52 differential.

Pictures dude! Pictures! Lol

 

[Finkaire]

Finally bought magnetic spark plug sockets, not for the truck but for the imports buried deep

 

[Mr Clean]

Kent Moore J-8763-1 Transmission Holding Fixture. Figure if I am going to tackle rebuilding my TH400 and 4L60E, may as well get the proper holding fixture to help in the rebuilding process.

Bought a J-6177 Differential Holding Fixture, but had to return it because it was too big for the HO52 differential.

That's right pics or it didn't happen...lol

 

[DoubleDingo]

Pics....

You must be registered for see images attach

This is the one I need, not the one I bought and returned. It's missing one of the holding plates. $325! Yikes!

You must be registered for see images attach

 

[Ricko1966]

Pics....

You must be registered for see images attach

This is the one I need, not the one I bought and returned. It's missing one of the holding plates. $325! Yikes!

You must be registered for see images attach

If you want to save some bucks,bolt the transmission to your engine stand by the engine mounting bolts,pull your pan,valve body etc. Use a steel plate cut out like a pan to bolt to the transmission pan rail. Bolt the plate upright to the engine stand.
Edit. Oh fck even easier.

xc_hide_links_from_guests_guests_error_hide_media

 

[DoubleDingo]

If you want to save some bucks,bolt the transmission to your engine stand by the mounting bolts,pull your pan,valve body etc. Use a steel plate cut out like a pan to bolt to the transmission pan rail. Bolt the plate upright to the engine stand.
Edit. Oh fck even easier.

xc_hide_links_from_guests_guests_error_hide_media

Too late, already bought the transmission holding fixture. But would like to get the differential holding fixture, just can't justify $325.

 

[Ricko1966]

Too late, already bought the transmission holding fixture. But would like to get the differential holding fixture, just can't justify $325.

You could make this

Pardon Our Interruption