15" rims over 8 lug 10 bolt front and 14 bolt

[ajd89]

look at Hercules Iron Man tires, bought a set of 35x12.5R20 for $800, set of comparable BFGs were $1400.

You must be registered for see images attach

I just priced some they are cheap your not kidding!

 

[Kyle Childress]

I just priced some they are cheap your not kidding!

I have about 700mi on my set now, they seem to be wearing good.... now these babys are LOUD, so if your wanting a quiet tire go elsewhere.

 

[78C10BigTen]

I have about 700mi on my set now, they seem to be wearing good.... now these babys are LOUD, so if your wanting a quiet tire go elsewhere.

I like loud knobbies lol

 

[JoshNoLimits]

Look for wheels that are 3 1/2 back space , summit has a few , bart super trucker's , raceline , us wheel. I did the grind in front and ran drop in 1/8 or 1/4 inch spacer's as well. My crew cab has bart 15x12 super truckers.

You must be registered for see images attach

I just bought a set of 15x10 Barts and looking to put them in my v3500. How would I determine the backspacing they have?

 

[nvrenuf]

I just bought a set of 15x10 Barts and looking to put them in my v3500. How would I determine the backspacing they have?

Barts typically have 3.5" backspacing. Backspacing is the distance between the back side of the lug flange to the rear lip of the wheel barrel.

With 3.5" backspacing, expect to grind the front calipers a little.

 

[squaredeal91]

I have a set of 15" 8 lugger wheels. The outter tie rod needs ground on a little I'm almost certain of. On mine one side cleared and the other didn't and I lost a 35 x12.50-15 in 2 miles lol

 

[nvrenuf]

I've had many sets of 3.5" to 4.5" backspace 8 lug wheels and never had any interference with the TRE's, something isn't right with that.