Square on the Interstate

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Wrighteous17

Junior Member
Joined
Aug 24, 2016
Posts
3
Reaction score
0
Location
Spencer, IN
First Name
Kevin
Truck Year
1987
Truck Model
V1500
Engine Size
350
I've driven my square as a daily driver for a few years now since highschool, and my route to my new college takes me on an interstate where cars are whizzing by at 70+. Can these old trucks handle the interstate? Mines an '87, so it has the TBI 350. I've been on the interstate a few times before with it but I'm scared to cruise at 70 in an (almost) 30 year old truck. But the engine has never given me any problems. Anyone else have any experience driving the interstate in their square?
 

Attachments

  • image.jpg
    image.jpg
    22.4 KB · Views: 133

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,789
Reaction score
3,327
Location
Texas
First Name
Viktor
Truck Year
sad
Truck Model
very sad
Engine Size
less sad
Cruise at around 80mph in a square suburban if in a hurry, otherwise a lot more fuel efficient at 65mph. A bit faster if loaded(due to gearing). If you have 700r4 and not too steep of a gears in the differential, should not be a problem. Even with a th350 or th400 70mph should be ok depending on the gearing.
 

rich weyand

Full Access Member
Joined
May 28, 2014
Posts
964
Reaction score
162
Location
Bloomington Indiana
First Name
Rich
Truck Year
1978
Truck Model
K10
Engine Size
350
I've done 175 mile shots from Bloomington, IN to Champaign, IL at 75 all the way on the interstate multiple times. Ran 320 miles each way from here to my bro's in IL at 75 all the way on the interstate. Mine's a '78 carbed 350 with TH350 and 3.73 gears.

As for mpg, I get 10 in town, 12 at 65, and 10 again at 75. That's in a K, with hubs free.
 

crazy4offroad

Equal Opportunity Destroyer
Joined
Jul 30, 2010
Posts
8,468
Reaction score
1,070
Location
West BY-GOD Virginia
First Name
Curt
Truck Year
1979
Truck Model
K-10
Engine Size
350/SM465/NP205
I've been wanting to put an NV4500 in dad's truck and daily drive it. If it had air it would be a great candidate for daily driving duty.
 

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,263
Reaction score
8,738
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
I drive my 87 on the highway daily with no issues. Usually keep it around 65-70
 

h3adbang3r14

Junior Member
Joined
Aug 24, 2016
Posts
16
Reaction score
2
Location
Ohio
First Name
markus
Truck Year
81
Truck Model
k20
Engine Size
sbc 400 from 78 k30
81 k20 with sbc 400 sm465 and 4.10 gears

i drive my 81 k29 with above combo at 75 on interstate all the time average 11 mpg in dry conditions and minimum wind
 

da_raabi

Trailer Park Supervisor
Joined
Aug 7, 2013
Posts
1,403
Reaction score
901
Location
FloriDUH
First Name
Adam
Truck Year
1986
Truck Model
c30
Engine Size
454
I drive my 87 on the highway daily with no issues. Usually keep it around 65-70

Same here. 86 1-ton with TH400 and 4.10s. I keep it between 60-70mph and cruise that way for as long as I like. It seems to like it right around 60, but I think that's the 4.10s. Never had any trouble with it, except the 6-7 mpg I get. Well maybe closer to 10 on the interstate.
 

Derick C.

Full Access Member
Joined
Nov 15, 2014
Posts
830
Reaction score
1,600
Location
Auburn WA
First Name
Derick
Truck Year
1990
Truck Model
1500
Engine Size
454/700r4
We do regular 6 hour trips to the dunes towing our 7k lb trailer at 75 and 80 at times. Squares are just fine on the hwy
 

Wrighteous17

Junior Member
Joined
Aug 24, 2016
Posts
3
Reaction score
0
Location
Spencer, IN
First Name
Kevin
Truck Year
1987
Truck Model
V1500
Engine Size
350
Thanks y'all, I feel a little bit better about driving it on the interstate now. Since the speedo maxes out at 85mph I was never sure.
 

mistaake

Full Access Member
Joined
Mar 20, 2015
Posts
651
Reaction score
17
Location
SF Bay Area, California
First Name
Michael
Truck Year
1999
Truck Model
Crown Vic
Engine Size
4.6
my 3/4ton suburban with 350 v8 and th350 (3spd auto) doesn't like going above 75mph. i don't have a tach but the engine sure does get noisy.
 

smoothandlow84

I'd rather be draggin' frame
Joined
Jan 4, 2015
Posts
2,121
Reaction score
784
Location
Arizona
First Name
Steve
Truck Year
1984 Frame...87 motor and 700r trans
Truck Model
1500 r10 pavement scraper
Engine Size
350 TBI
Bury the needle at 85...no problem. The truck will outrun what the speedo reads. Gm topped out the speedo at 85 to slow the public down. Earlier speedos read up to 100mph
 

74propu

Full Access Member
Joined
Aug 8, 2015
Posts
687
Reaction score
242
Location
florida
First Name
austin
Truck Year
1974 1980 1986
Truck Model
c10s/b c10 s/b c10l/b
Engine Size
5.3 / ?/454 tbi
my 74 don't start running good till around 80 and likes 100 as a cruse speed that's when it is happy about 4 pounds of boost so go for it
 

7903sc

Junior Member
Joined
Aug 13, 2016
Posts
11
Reaction score
0
Location
Chino Vally AZ
First Name
Alan
Truck Year
1979
Truck Model
C30
Engine Size
454
430,000 miles 90% towing 79 C30 dually> I would drive it anywhere our speed is 75 on the hwy and if you go 75 you get run over.
 

throttle out

Full Access Member
Joined
Sep 10, 2015
Posts
98
Reaction score
55
Location
Michigan
First Name
Sam
Truck Year
1987
Truck Model
V10
Engine Size
5.3 LS
I drive my 87 V10 LS swapped short bed on the highway on a daily basis. I'm still on the 700R4 with I believe either 3:83 or 4:10 gears on 33x12.50's. My truck happily rolls down the highway at whatever speed I please, however, my driveshaft u-joints are in need of replacement so the vibration disappears above 80 mph! It spins around 23-2,400 rpm at 80.
However you see it, if your truck is in good mechanical order there is NOTHING to worry about.
Although vehicles these days are quiet, more efficient, and more comfortable the basics are the same as they always have been.
 

Keith Seymore

Full Access Member
Joined
Jul 13, 2015
Posts
2,640
Reaction score
8,129
Location
Motor City
First Name
Keith Seymore
Truck Year
1987
Truck Model
R10
Engine Size
4.3L
Bury the needle at 85...no problem. The truck will outrun what the speedo reads. Gm topped out the speedo at 85 to slow the public down. Earlier speedos read up to 100mph

Agree. My '87 was a daily driver for almost 30 years - it will go as fast as you want for as long as you want.

4.3L TBI, overdrive trans, 3.73 axle.

K
 

Latest posts

Forum statistics

Threads
42,158
Posts
910,324
Members
33,655
Latest member
djisurfli
Top