spenser21
Full Access Member
- Joined
- Oct 27, 2016
- Posts
- 151
- Reaction score
- 3
- Location
- a
- First Name
- a
- Truck Year
- 1
- Truck Model
- 1
- Engine Size
- 1
so im new here, but im having trouble with my 74 k10. she has a small block in her. when I got her there was water in the tank.so I dropped the drivers side tank, (passenger side gone), cleaned out the tank, added new sender, with fuel hose , and an inline filter up top. after that ive been driving her to and from work but constantly have to "two foot" it to keep her alive. ive changed plugs, wires, and distributor but still nothing better. Ive bought a rebuild kit for the edelbrock 1405 that's on but im not sure if this is the next right step or not.??? my problem is that without feeding it gas, it almost instantly dies at any stop sign or stop light. during idle it sounds super choppy and adjusting the idle only helped so much. so much that idle is ok, until I put her in gear then rpms go from 800 to 550 if she doesn't shut down. any help is appreciated as this is my first truck. thanks
Last edited: