HRPC's trip to Pull A Part

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,045
Reaction score
9,087
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
Damn, those panels are nice. Wish I could find some nice tan panels, I could use some for my 84'. Right now I'm running the blue panels from my 87', haha. The original panels in the 84' were literally crumbling.

This actualy give me 2 nice sets of Tans. My 85C20 that has the real nice interior is also tan. I hope to have that truck together this fall. I just need to find 4 tan straps now.
 

Attachments

  • 85C20PassDoorPan.jpg
    85C20PassDoorPan.jpg
    89.8 KB · Views: 142

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,590
Reaction score
6,023
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
**** yeah dude! :grd: Nice to see you getting some play time. :)
 

RetroC10Sport

Supporting Member
Supporting Member
Joined
Sep 29, 2010
Posts
17,101
Reaction score
2,237
Location
Green Bastard Parts Unknown
First Name
Jay
Truck Year
2001
Truck Model
pontiac aztek
Engine Size
3.4
I'm headed to Austin Wrench-A-Part tomorrow and probably again Friday with Frank.
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,045
Reaction score
9,087
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
I'm headed to Austin Wrench-A-Part tomorrow and probably again Friday with Frank.

yeah yeah yeah, blah blah blah, :flipthebird:

:happy175:


I hope to be down there sometime this fall. Yo Ass better be ready to go too.

Isn't Budget Wrench a good place too?
 

RetroC10Sport

Supporting Member
Supporting Member
Joined
Sep 29, 2010
Posts
17,101
Reaction score
2,237
Location
Green Bastard Parts Unknown
First Name
Jay
Truck Year
2001
Truck Model
pontiac aztek
Engine Size
3.4
Austin Wrench-a-part and Budget wrench-a-part are owned by the same guy, just Budget Wrench is in Belton, Tx.. He's opening one in Lubbock soon too.
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,045
Reaction score
9,087
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
Austin Wrench-a-part and Budget wrench-a-part are owned by the same guy, just Budget Wrench is in Belton, Tx.. He's opening one in Lubbock soon too.

unh huh, I see you avoided the. "Yo Ass better be ready to go" !!!


WTH would he be using different names. If he has different locations, it would seem to me he could get the better advertising dollar by naming them the same. Unless he's cooking books, 1 makes a little money and 1 is a loser.
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,045
Reaction score
9,087
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
**** yeah dude! :grd: Nice to see you getting some play time. :)

NO doubt. I'm not "GETTING" some play time. I "TOOK" some play time. Took advantage of nice weather and getting away from the house. Figured I'd try to find a dizzy for the C20 and a PS pump for the K1500. It worked out, they had some good ****. I should go back and get the rest of the tan trim and kick panels tomorrow. I would have got it today, but you know my son has more important things to do like go sit on his ass at his friends house or my daughters house so he wasn't here to go with me. It's OK though. He's 17 and had a drivers license, and I"m not fixing **** for him to drive. He's ****** hisself.
 

RetroC10Sport

Supporting Member
Supporting Member
Joined
Sep 29, 2010
Posts
17,101
Reaction score
2,237
Location
Green Bastard Parts Unknown
First Name
Jay
Truck Year
2001
Truck Model
pontiac aztek
Engine Size
3.4
unh huh, I see you avoided the. "Yo Ass better be ready to go" !!!


WTH would he be using different names. If he has different locations, it would seem to me he could get the better advertising dollar by naming them the same. Unless he's cooking books, 1 makes a little money and 1 is a loser.

He makes $4,000,000 a year on these yards. And having owned a yard, I know there's a shitton of money to be made if you run things right.

And yeah, we'll play it by ear but I should be good to go, fall is a ways away yet.
 

Tyger13us

Full Access Member
Joined
Jan 13, 2012
Posts
267
Reaction score
8
Location
BFE,Ut
First Name
Jeff
Truck Year
78
Truck Model
k10
Engine Size
450hp/357cid
This actualy give me 2 nice sets of Tans. My 85C20 that has the real nice interior is also tan. I hope to have that truck together this fall. I just need to find 4 tan straps now.

Man? wish i could find some Saddle tan interior,, complete......

All there is around here is MAROON.......

i got lucky for my 4x4 and found all blue in a truck, "83" but its pretty much sun baked,, but i use it anyway,, in a "78k10 4x4",, but!! better than MAROON........

so i used a brown dash that was pretty good "85" and covered it with a blue dash cover...

but with tan/saddle? ya cant see all the dust,, its the same color!!!!!

HAHAHAHAHAHAHAHA.......:beatdeadhorse5:
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
29,300
Reaction score
24,603
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Those tan panels do look nice!

Seems like 50% of the interiors around here are blue, then red/maroon, gray, then finally tan. You almost never see charcoal anymore. Figures my least favorite is the most common.
 

Driver4r

Full Access Member
Joined
Jun 21, 2012
Posts
3,087
Reaction score
40
Location
Nebraska
First Name
Trevor
Truck Year
76,74
Truck Model
k10,c20
Engine Size
355/th350/np203, 454/th350/ff-rear
Man? wish i could find some Saddle tan interior,, complete......

All there is around here is MAROON.......

i got lucky for my 4x4 and found all blue in a truck, "83" but its pretty much sun baked,, but i use it anyway,, in a "78k10 4x4",, but!! better than MAROON........

so i used a brown dash that was pretty good "85" and covered it with a blue dash cover...

but with tan/saddle? ya cant see all the dust,, its the same color!!!!!

HAHAHAHAHAHAHAHA.......:beatdeadhorse5:

My 74 is saddle, And i put the door panels in my 76 cause mine were white. And im gonna dye these black if i dont find another set of door panels to put in it.
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,045
Reaction score
9,087
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
He makes $4,000,000 a year on these yards. And having owned a yard, I know there's a shitton of money to be made if you run things right.

And yeah, we'll play it by ear but I should be good to go, fall is a ways away yet.

Ohh yeah, I know. I'd never just drop in on you. You'll have plenty of notice, maybe a week or so. And if you have things going on, maybe a reschedule. Also, you won't have to take the whole day. But yeah, we'll get it worked out and see who else we can meet with and go with us, like Frank or if Foamy can make it too. We'll make a party of it and make everyone else jealous with our get together and then with all the cool **** we got. :waytogo:
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,045
Reaction score
9,087
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
I'm probably going back to get the rest of the interor except the dash board. All the trim around the windshiled post, headliner trim, kickpanels and all are in great shape. There is a little dirtyness on the door panel lower carpet and the door panel insert fabric on the driver side, but I feel confident with some carpet and upholsetery cleaner I can make it look real close to new. Tan isn't my color choice at all, but when I find in this good of condition, I'm getting it. Not only cheap at PAP, but I don't want to buy new and have it painted. I'd rather have factory manufactured in the correct color and if its in good shape I'll live with it and like it. I'd love to find a good charcoal interior. I've also see a nice brown interior too and I do like that better than tan.
 

RetroC10Sport

Supporting Member
Supporting Member
Joined
Sep 29, 2010
Posts
17,101
Reaction score
2,237
Location
Green Bastard Parts Unknown
First Name
Jay
Truck Year
2001
Truck Model
pontiac aztek
Engine Size
3.4
My 74 is saddle, And i put the door panels in my 76 cause mine were white. And im gonna dye these black if i dont find another set of door panels to put in it.

What did you do with the white panels? Those are quite rare as I believe they were only on special models like the Impact and Spirit of '76 trucks.

Ohh yeah, I know. I'd never just drop in on you. You'll have plenty of notice, maybe a week or so. And if you have things going on, maybe a reschedule. Also, you won't have to take the whole day. But yeah, we'll get it worked out and see who else we can meet with and go with us, like Frank or if Foamy can make it too. We'll make a party of it and make everyone else jealous with our get together and then with all the cool **** we got. :waytogo:

Sounds good to me. I'll send along my number.
 

Driver4r

Full Access Member
Joined
Jun 21, 2012
Posts
3,087
Reaction score
40
Location
Nebraska
First Name
Trevor
Truck Year
76,74
Truck Model
k10,c20
Engine Size
355/th350/np203, 454/th350/ff-rear
What did you do with the white panels? Those are quite rare as I believe they were only on special models like the Impact and Spirit of '76 trucks.

My truck aint nothing rare, but i still have them....

Actually scratch that, they may be faded blue...... Its a really light blue.
 

Latest posts

Forum statistics

Threads
42,451
Posts
916,325
Members
33,981
Latest member
12turnda
Top