Latest activity
-
Snoots reacted to justhorns's post in the thread What have you done to your square lately?? with
Haha.
Not saying the speedo is accurate -
RRicko1966 replied to the thread Brake Fluid Flush GMT800.You do start with the longest line,it removes the most fluid and air minimizing the risk of air bubbles being reintroduced to the system.
-
Snoots reacted to justhorns's post in the thread What have you done to your square lately?? with Like.
I just pegged my Speedometer at 85! Downhill, but, hey.. 250-6 3 speed on floor. 44 years old, never been apart.
-
Homemade version if you make one. Drill the heads of the bolts with a large bit to make a divot on the heads. to keep from walking off... -
Rsuck the master and refill that with clean fluid then just bleed old school. You should do this at minimum every two years. Brake fluid...
-
RRicko1966 replied to the thread Brake Fluid Flush GMT800.It's neither. A booster causes a hard pedal not a soft pedal or low. Old brake fluid is still hydraulic,so still noncompressable, so...
-
Lol, I'd just drive it until the rods suddenly started to hammer and it lost all it's horse torques, then pull off the side of the road...
-
WFO reacted to idahovette's post in the thread What have you done to your square lately?? with Like.
Kept a 5 gallon can of 30 weight and a funnel in the trunk of my 56 150 4 door hardtop.....when the oil light came on, I got out the can...
-
Snoots reacted to Grit dog's post in the thread 86 C20 - Climate control not changing position - cable or vacuum operated? with Like.
Yup. That goes to one of the vac ports on the hvac box. If you take off the glove box door and remove the glove box most of them are...
-
DI’ve done a lot of work on it, but it’s no where near done. I’ve driven it from Houston to P-ville and from here to Dallas and back...
-
-
Sgt Gus replied to the thread What have you done to your square lately??.Where did you order yours? Wasn't sure if we should replace or get rid of. Notice anything, like less noise?! -
11976dully replied to the thread What have you done to your square lately??.Read in a HotRod magazine in the 80s or 90s that Krylon dull aluminum was the closest to the original color Chevy used on their steel...
-
Goldie Driver reacted to TheHoundsman's post in the thread Searching for My Dad's 1979 Chevy Suburban with Like.
Update to the continued cross-over steering saga, lol. I finished drilling out the knuckles, inserting the corrective bushings, and... -
Have a great Snap On dealer finally. Came yesterday and seen he had a positive attitude, it was with his service too. Our last one was a...
-
This sucker is FREAKING TALL and I love it! It sure has come a long way in less than a year lol
