Various parts wanted

[1973 Chevy]

Im still looking for some parts that I need so I thought I would see what you guys got.

I need:
Brake line to brake hose adapters - goes in those brackets and I believe theres 3 of them

Vent caps that are at the ends of the hoses on the axles

Clutch pedal assembly

Shifter knob 4 speed Muncie SM465

Anchore plate or whatever you wanna call it that bolts down the 4wd shifter on the 208

You must be registered for see images attach

 

[89Suburban]

I'll keep an eye open for ya hoss.

 

[1973 Chevy]

I'll keep an eye open for ya hoss.

Sounds good!

 

[1973 Chevy]

I managed to get my hands on a clutch pedal assembly and gas tank brackets also with a tailgate. But I still need the brake fittings and shifter knob - I can fab up a plate for the 4wd shifter.

 

[crazy4offroad]

I have a B&M t-handle shifter for the SM465, with a nitrous switch if you were so inclined lol. Wish I would have seen this sooner I had 2 sets of clutch pedal/brake pedal assemblies. You should be able to get the axle vent caps at any parts store.

 

[89Suburban]

I don't know what ya mean about the brake fittings. I thought it was just the rubber line with the fitting built into them to mount to the frame with the clip? I got the vent caps for you, tell me how many you need and PM me your addy.

 

[1973 Chevy]

I don't know what ya mean about the brake fittings. I thought it was just the rubber line with the fitting built into them to mount to the frame with the clip? I got the vent caps for you, tell me how many you need and PM me your addy.

you could be right on the fittings, i really never looked hard at my old ones because they were so bad.

 

[1973 Chevy]

I have a B&M t-handle shifter for the SM465, with a nitrous switch if you were so inclined lol. Wish I would have seen this sooner I had 2 sets of clutch pedal/brake pedal assemblies. You should be able to get the axle vent caps at any parts store.

Yeah Ill just put nitrous in my truck lol, it was easier to find a pedal than I thought it would. The same guy who sold me my cab has 4 53' semi trailers and a school bus just packed full of sb parts plus how much junk hes got laying around.

 

[Mr Clean]

You don't have to use the NO2 button for NO2, you can use it to turn on you interior mood lights, or what ever. Think outside box.

 

[1973 Chevy]

what does the knob look like C4?

 

[Driver4r]

C4, if he doesnt take it, Would it fit on a Quarter Stick?

 

[bucket]

You don't have to use the NO2 button for NO2, you can use it to turn on you interior mood lights, or what ever. Think outside box.

Yeah, it could turn on the seat heater or the coffee maker.

Seriously though, those buttons are usually used for the line-loc I think.

 

[Driver4r]

Yeah, it could turn on the seat heater or the coffee maker.

Seriously though, those buttons are usually used for the line-loc I think.

Correct.Line-loc, or trans-lock

 

[crazy4offroad]

Similar to this one but I'll get a pic of what mine looks like, the finish isn't as nice anymore...