Hazards, one light

[Sgt Gus]

Hmm, replaced turn signal switch which had new hazard switch on it.
So, waiting on broken button, but with screw in place I turned them on to ck before assembly. Just the drivers side front light flashes, not passenger. Turn signals and also fixed high/low beam, both work.
It's just the brown wire? So, new switch could be bad? But why one light and not both, or both not working? Errrr

 

[Snoots]

Make sure your connector at the bottom of the column is seated properly and check for pushed pins and pinched wires.

 

[Sgt Gus]

Make sure your connector at the bottom of the column is seated properly and check for pushed pins and pinched wires.

Okay, I will.