Deeeluxe rear view mirrors fo sail

[RetroC10Sport]

Anytime guys, if you've got a question about wiring, just ask.

 

[DREAMER]

Come across anymore mirrors? Wanting to get one like yours in your build page with temp gauge and maybe figure out how to wire it for my garage door or something

 

[HotRodPC]

Welcome aboard Dreamer. So you're looking for one with Homelink feature right?

 

[DREAMER]

Yea...I think he said it was on the Onstar mirror he just finagled the wires to make it cooperate

 

[RetroC10Sport]

I had to make some changes in the electronics to make the HomeLink work and honestly, I'd rather just put in an overhead console than to do it again.

I do have some compass/temp mirrors though, they aren't the dual display though.

You must be registered for see images attach

 

[DREAMER]

Does it come with the temp gauge and harness...plus a 'Wiring a Mirror for Dummies' guide?

 

[Old77]

Does it come with the temp gauge and harness...plus a 'Wiring a Mirror for Dummies' guide?

There's a few write ups on it running around the web. Here's a summary of what I have...

GM wire harness color // function
PIN 1 PINK // POWER +12 volts
PIN 2 BK // CHASSIS, GND
PIN 3 LT GRN // BACKUP LIGHTS
PIN 4 GY // TO AUTO DIM OUTSIDE MIRROR
PIN 5 PINK // TO AUTO DIM OUTSIDE MIRROR
PIN 6 DR GRN/WT // TEMP PROBE
PIN 7 BK/WT // TEMP PROBE

you only need to hook up 4 wires on the mirror, power and ground and the other 2 wires run to the temp sensor where ever you mount it. best to put it infront of the grill.
PIN 1 PINK // POWER +12 volts
PIN 2 BK // CHASSIS, GND
PIN 6 DR GRN/WT // TEMP PROBE
PIN 7 BK/WT // TEMP PROBE


Youll need a total of 4 wires for this installation. The 3 wires just leave alone. Just cut and isolate so they dont touch each other.

You must be registered for see images

Retro may even have a cleaner summary than this

 

[RetroC10Sport]

Does it come with the temp gauge and harness...plus a 'Wiring a Mirror for Dummies' guide?

Not a complete harness but enough to work with. The hardest part is running the wires. And yes, temp sensor is included.

Old's post above is a fine diagram, but I'd put the temp sensor behind the grill, not in front.

 

[DREAMER]

Well PM me with the info ($, shipping, etc)...next on my list is the 3rd brake light, wutcha got?

 

[Old77]

Not a complete harness but enough to work with. The hardest part is running the wires. And yes, temp sensor is included.

Old's post above is a fine diagram, but I'd put the temp sensor behind the grill, not in front.

 

[DREAMER]

Ttt