ATF coming out of vent tube

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Italianwagon

Full Access Member
Joined
Apr 2, 2020
Posts
139
Reaction score
144
Location
Washington
First Name
Steve
Truck Year
1987
Truck Model
V20 Suburban
Engine Size
350
Ok so drove the burban around and crawled underneath later noticing atf fluid everywhere. Any ideas why? Looks to have come from the vent tube

just recently replaced radiator with new internal trans cooler, thermostat And rest of the cooling system.

Excess fluid being pushed out or moisture being burnt off? This from the new radiator and internal tranny cooler?

attached photos are of the vent tube and just to confirm that’s a th400 right?
 

Italianwagon

Full Access Member
Joined
Apr 2, 2020
Posts
139
Reaction score
144
Location
Washington
First Name
Steve
Truck Year
1987
Truck Model
V20 Suburban
Engine Size
350
Sorry here’s the photos

You must be registered for see images attach


You must be registered for see images attach
 

QBuff02

I like Big Blocks and I cannot lie
Joined
Feb 28, 2017
Posts
867
Reaction score
1,598
Location
Central IL
First Name
Quincy
Truck Year
1982
Truck Model
K30
Engine Size
454
The only time I've ever had fluid push out the vent tube on a th400 is when the trans was overfull. Did you add some fluid back to it after you changed components? If so you might not have lost as much as you thought and it's just pushing a little out. Do you have rubber lines inline with the metal going to new cooler? Possibly check for a kink or a restriction in one of the lines if nothing else has changed.
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,436
Reaction score
5,562
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
A plugged cooler will also cause it to shoot out like that. Did it drive ok? Definitely check the fluid level. There was a roadkill episode where they had a clogged external trans cooler and it was plugged up solid, every time they started it, the trans fluid would flow out of the dipstick tube from the restriction. If you just had the trans cooler replaced in the radiator, check for kinks and restrictions.
 

Italianwagon

Full Access Member
Joined
Apr 2, 2020
Posts
139
Reaction score
144
Location
Washington
First Name
Steve
Truck Year
1987
Truck Model
V20 Suburban
Engine Size
350
Fluid was full and not burnt. Drove fine all day. Checked the transcooler. Didn’t see any obstructions and seemed to be flowing fine
 

Rhett Croley

Junior Member
Joined
Feb 25, 2020
Posts
20
Reaction score
41
Location
Augusta, GA
First Name
Rhett
Truck Year
1990
Truck Model
K5
Engine Size
496
Is it coming out of the transmission vent or the t-case vent. If it's the t-case then transfer case-transmission seal is blown and pumping transmission fluid back into the transfer case and it's running out of the vent tube?
 

ballencd

Full Access Member
Joined
Aug 30, 2013
Posts
119
Reaction score
55
Location
Columbus, NC
First Name
Charlie
Truck Year
1988/1991/1983/1984
Truck Model
V10 Suburban/V1500 Suburban/M35 bobbed w/dump/M1010
Engine Size
5.7/5.7/LDT 465-1c/6.2 diesel
I concur with last post. The transmission pumps fluid into the transmission to transfer case adapter, apparently to lube the speedo gears and drains back into the transmission. IF the transfer case front seal is gone it gets pushed into the transfer case and forced out the vent on top. I had this happen to my 91 V1500 awhile back. Quick fix with the front seal. When I pulled my transfer case it appeared dry but idling it with the transfer case off, it will squirt fluid into the empty adapter.
 

Latest posts

Forum statistics

Threads
44,026
Posts
947,968
Members
36,091
Latest member
Grjmmr
Top