Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
Trying to install dakota digital guages in my truck and would like to hook up the 4x4 light. The light on the stock cluster goes to pin 14. It's empty. Any help would be appreciated. Thanks
It's a ground signal from the shifter switch. I want to say it's a tan wire. If you don't have it in the plug,bits been removed for some reason. Easy to trace from the shifter assembly.
Ok, I got ya. It's been a few years since I did mine. So to verify, the pnk/blk and white wire your holding it the 4X indicator bulb in the gauge panel?