10bolt rear end swap

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

The88

Mhmm
Joined
Dec 9, 2015
Posts
1,074
Reaction score
1,363
Location
South Louisiana
First Name
ThatGuy
Truck Year
88
Truck Model
K5
Engine Size
5.7
from what year to what year rear can I stick in an 88 K5? I need a cheap swap to get Stitch up and rolling again. With me not working I can't do my rear gear and locker swap so I plan on hitting pull a part if they have what I need.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
29,150
Reaction score
24,118
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
They started in the '82-'83 year range. Through '87 in pickups and through '91 in K5's and Burbs.

You can use a 2wd axle too, just swap in your current shafts and drums. BUT, you have to be careful with axleshaft spline count going that route, they went from 28 spline to 30 spline in '88-'89. You could have either.
 

The88

Mhmm
Joined
Dec 9, 2015
Posts
1,074
Reaction score
1,363
Location
South Louisiana
First Name
ThatGuy
Truck Year
88
Truck Model
K5
Engine Size
5.7
Roger... needless to say I need to look around for a junked half ton around the same year. I was considering a rear from a 99 with lsd if it would drop right in.
 

Latest posts

Forum statistics

Threads
42,216
Posts
911,479
Members
33,720
Latest member
xXmutantXx
Top