Search results

  1. 67ventwindow

    Never a simple task

    Well I got it to go on my bandaided QuadraJet. New tires on her. I replaced taillight receptacles and took her to be inspected, the day before we moved. I failed for upper ball joint. So I ground off the old rivets and replaced them. SHow up the next morning to get reinspected and she passes. To...
  2. 67ventwindow

    Let's talk vehicle security...

    You have a good point. Just cause the vehicle is not desirable to sell whole or parts it can still be stolen. There are some out there that only require it to get to point B. Knowledge of a standard it not needed as long as you get to point B.
  3. 67ventwindow

    Why You No Hood Emblem?

    My guess is for the often requested flamethrower attachment. Not mine.
  4. 67ventwindow

    What new tools have you got lately?

    I have the SAE and metric for a few years the older ones the had the size painted on but has rubbed off a few of them . But with them being black the good old junk yard paint pen works great. The new ones are engraved and the paint pen works out good there too.
  5. 67ventwindow

    Let's talk vehicle security...

    I have some of my projects hot wired so I can drive them. 10ft of wire and alligator clips. FI has many points where to disable them. if your running a carb and mechanical pump. Progression Ignition distributors you can turn off your ignition with your phone. Remote coil? If all else fails...
  6. 67ventwindow

    Hi guys new here have 1987 c-10

    Welcome from NW Missoura. I am stunned how much yours looks like mine. Even the barn in your pic. Nice ride!
  7. 67ventwindow

    New to forum in Texas

    Welcome from NW Missoura
  8. 67ventwindow

    Making multipurpose shops work

    I am not a big wood worker. I have a table saw, band saw and a router table. I set them up in the horses shower stall it has cross ventilation and easy to clean up. If I don't need one of the three I just do it outside. I don't have much to cleanup that way. In my garage, I do have a little...
  9. 67ventwindow

    Window motor

    Air chisel? I thought it was a T-post and a sledge. At least the guy didn't have a torch.
  10. 67ventwindow

    Newest guy

    Welcome from NW Missoura. Like the saying goes SHOW ME!! Where is the empirical photographic evidence.
  11. 67ventwindow

    Never a simple task

    Well its back to cutting and grinding things off. Cut the flex hose off and ground off the ends. The hard line twisted so off it came too. But I now have fluid at all four corners!! Now all the work is to make it go.
  12. 67ventwindow

    Never a simple task

    And then there was one. I replaced the wheel cylinder a little more evolved than I hoped. It setup my next project after brakes will be bearings all the way around and clean out the rear end. Its raining today but I think I can get to the left front and find the fluid issue.
  13. 67ventwindow

    Never a simple task

    Well now both the front and rear on the passenger side has good brakes. The other side has bad wheel cylinder and no fluid to be found in the front drivers side. I have a new flex line and new caliper. just using that dry fluid.
  14. 67ventwindow

    Brush Guard, watchu tink?

    After reading your post I picked up one myself. The bolt holes line in the bumper, I want to keep the grate and see if everything lines up well. Then I think about a repaint.
  15. 67ventwindow

    Daily Drag Racer times

    Is this a handicapped event? Give me down hill at a 15% grade?
  16. 67ventwindow

    Ontario canada

    Welcome. Can wait to see more of that square.
  17. 67ventwindow

    Proud New 1976 Square Body owner!

    Welcome!
  18. 67ventwindow

    Bvllsh!t on craigslist.

    My Tae Kwon Do instructor told us the reason why they changed money for the Saturday weapons class was if people paid money they show up. You didn't get 40 people signing up on a maybe when there is money on the line. Sure enough every Saturday every one that paid showed. By contrast the...
  19. 67ventwindow

    Never a simple task

    Its suppose to be in the 100's most of the week. So I am going to get that Kansas dust bowl dirt out of the window channels. Only the Drivers window will moves reliably. If I ever do get it on the road that makes for a hot drive with no AC.
  20. 67ventwindow

    Long time lurker, Blackfoot Idaho

    Welcome. Nice pictures.
  21. 67ventwindow

    Flex hose nut

    So I get the correct part and it started tearing up the threads. So getting a real nut and calling it good.
  22. 67ventwindow

    Painted Emblems

    Nice contrast there. Really pops
  23. 67ventwindow

    Show your daily driver

    Room for 4 and 6 C30 wheels. But its an ugly thing that I can not bare to even photograph. Its a formless grey lump like most cars of today.
  24. 67ventwindow

    Homemade and modified tool thread

    I was thinking mud bugs. Some one joined from Louisiana and crawfish have been on my mind since then.
  25. 67ventwindow

    Hey Y'all!

    Welcome. Love Louisiana was there last time I was allowed to leave the state. That was for Hurricane Rita and Katrina From W Missoura!

Latest posts

Forum statistics

Threads
42,233
Posts
911,840
Members
33,736
Latest member
referrich
Top