Search results

  1. AKguy

    454 Crankshaft rod journal

    So, is there any “depth” to the darker areas? Looks similiar to past area of corrosion.
  2. AKguy

    What new tools have you got lately?

    Finally purchased an Innova 5160RS OBD2 scanner. Coupled with the app it has been very easy to use. Quite handy.
  3. AKguy

    Hyd roller with stock timing cover

    Used a Comp Cams retrofit roller with button. Trimmed the button a bit to fit correctly under the stock cover. Works fine.
  4. AKguy

    What is my new squarebody??? Need help!

    You may be able to use the serial number, which is probably a National Stock Number (NSN), and find it that way.
  5. AKguy

    What new tools have you got lately?

    Purchased a new valve spring compressor tool #648615 from Advanced Auto here. It could not budge the Comp springs on my 454. So I bought a large C clamp and made my own. Works great.
  6. AKguy

    Is there such a thing as Cams for Dummies

    I used to think the same until I had a set of roller lifters fail recently.
  7. AKguy

    Is there such a thing as Cams for Dummies

    Check this guy out at Myvintageiron7512 on YouTube. He has some good stuff.
  8. AKguy

    Question on RTV if needed or not

    Prolly would not hurt. This may be obvious, but was not to me for a long time, if that is an auto, use the sealant rated for auto trans fluid.
  9. AKguy

    Venture a guess…

    STC? Another aviation guy…
  10. AKguy

    Oil in the “heat passages” on BBC 360 heads

    Negative.
  11. AKguy

    Oil in the “heat passages” on BBC 360 heads

    Liquid oil.
  12. AKguy

    Oil in the “heat passages” on BBC 360 heads

    Hmmmm, thanks.
  13. AKguy

    Oil in the “heat passages” on BBC 360 heads

    I was surprised to find lots of oil in the passages between the #4 and #5 exhaust over to the intake manifold on both 360 heads. Should I be? Cracked heads? Blowing in from the exhaust stroke? Thanks.
  14. AKguy

    Torque Value Calculation, JD 310D

    According to the fine gentlemen over at another forum dealing with heavy equipment, the values are a plus or minus affair, so, for the rears, it is 425 foot pounds plus 125 or minus 85. Seems like a huge spread, 210, to me.
  15. AKguy

    Torque Value Calculation, JD 310D

    Great replies. Thank you.
  16. AKguy

    Torque Value Calculation, JD 310D

    Thanks. The rub is how do you measure backing them off? Angle? Distance? If distance, what scale is used? This stuff drives me crazy (ier).
  17. AKguy

    Torque Value Calculation, JD 310D

    Both the front wheel nuts and the rear wheel cap screws (bolts).
  18. AKguy

    Torque Value Calculation, JD 310D

    Trying to figure out the rear wheel cap screw, 3/4x10, torque for my loader backhoe. Here’s the manual info. I am guessing the “equation” relates to force and distance. I have them torqued at 85 foot pounds right now. I’m sure some of you know this stuff. Thanks.
  19. AKguy

    Broken hearted kid and fuel system

    Any possibility there is a venting issue?
  20. AKguy

    2011 Suburban Box mystery

    Looks like it is supposed to mount in the right rear frame corner.
  21. AKguy

    2011 Suburban Box mystery

    That makes sense. I will look to see where it should have been mounted. I imagine it can’t be too far away, given the length of the lines.
  22. AKguy

    2011 Suburban Box mystery

    While looking at the empty spare tire carrier, I noticed a box that is tie wrapped in place. I have no idea what it is and why it is in the way of hanging a spare.
  23. AKguy

    Amazon TIG welders?

    My 2 cents worth for new TIG welder is not to begin with a “scratch start” machine, and, once you start TIG welding you will likely yearn for more abilities, like welding aluminum.
  24. AKguy

    2016-17 Silverado 2500 tap into backup light circuit?

    Yes, it does. Thanks.
  25. AKguy

    2016-17 Silverado 2500 tap into backup light circuit?

    Thanks.

Latest posts

Forum statistics

Threads
42,105
Posts
909,171
Members
33,588
Latest member
mack541
Top