Search results

  1. G

    Sealing Windshield

    Not to mention time. I just want to get the rust or whatever this would be considered sanded/converted as best possible to keep it from coming back through. I don't want to epoxy primer, body filler spots, high build primer, block, primed again, paint etc. There's plenty of dents and dings that...
  2. G

    Sealing Windshield

    I will let you know. I think it will be a while before it goes back in. I think I have let things get a little bit out of control. The brown you see in the pictures is not nice brown paint it is sun baked surface rust type stuff. The whole truck is that way. I just got done wiring the garage for...
  3. G

    Sealing Windshield

    Been gasket should be here this week. We'll see what happens. Thanks for the input guys.
  4. G

    Sealing Windshield

    Think urethane is needed or the seal will be good?
  5. G

    Sealing Windshield

    I just used Rustoleum's rust converter.
  6. G

    Sealing Windshield

    I wire brushed all the gunk out and sprayed the bare metal with a rust converter. I will try and get some pics of the rust. I guess worst case I could install without urethane and if it leaks its clean and easy to pull out and urethane.
  7. G

    Sealing Windshield

    What are the thoughts on urethane under the windshield gasket? My bottom corners were leaking and the gasket was pretty dry and hard. When I pulled it it had urethane under the gasket. Obviously this blocked the drain holes in the corners. The inside radius of the pinch welds in the corners are...
  8. G

    Spring Pads

    I lifted it with blocks a couple years ago. I don't have the rubber anymore. I put it back together without them. I'm putting actual lift springs in it so I was just trying to line up all the parts. It doesn't look like they're in the schematic so they must not be needed. Does everyone else just...
  9. G

    Spring Pads

    Thanks for the help.
  10. G

    Spring Pads

    Well it doesn't show it in there. It goes under number 9 and takes up the space under the hump it. Since the schematic doesn't show it fair enough I'll slap it together without it.
  11. G

    Spring Pads

    Thank ya sir.
  12. G

    Spring Pads

    Thank ya sir.
  13. G

    Spring Pads

    When I lifted my truck there were rubber pads ontop of the back springs that matched the contour of the top plate with a hole for the center bolt. They were completely rotted out. Is there anywhere to get these from? If not what do people usually do? New top plates to center up on the center bolt?

Latest posts

Forum statistics

Threads
42,220
Posts
911,621
Members
33,727
Latest member
Ls85c10man
Top