Search results

  1. Fastduramax

    Header clearance front shackle 86 k10

    Haha love it reminds of back in the 80’s/90’s working my ass off but still poor lol, bought Blackjack headers for all my Squares and an extra can of black rattle can header paint, couldn’t afford good Hookers back when they were real Hookers and not owned by Holley… In hind site it woulda been...
  2. Fastduramax

    Nice squarebody on BaT

    Well shiver me timbers !!! Purchasing a Squarebody for a nice ride is a strange new concept but I'll go with it ! Not to mention the economical value of the 4 slices of sheetrock you can haul in a C10 with the gate closed ! With the "original" 1600 miles and Home Cheapo being an average of 10...
  3. Fastduramax

    Icing on the cake !!!

    My next dilemma is location and plumbing of the fuel pressure regulator, my goal was to do it the ultimate correct way but not totally necessary on a NA motor under 800hp but correct none the less... So I have a single inlet dual outlet MRW billet 10 micron filter and all AN fittings to feed...
  4. Fastduramax

    Icing on the cake !!!

    Those are stove pellets JD I have or had 8 ton in the basement when we start burning each stacked 1.5 ton high to fit, made in America too not that place to the north of us... Thanks Mike yup zero interest in a LS, the Bro-Flo I needed was not available at the time of build, I'm adamant about...
  5. Fastduramax

    Icing on the cake !!!

    Well here is a much more finished product, finally set the distributor depth yesterday and a bunch of other small stuff, the Q tip and red distributor are absolutely hideous, I seen a polished aluminum intake on YouTube today that buckhorned into 2 Q tips like the one I have but it was on a SBC...
  6. Fastduramax

    Nice squarebody on BaT

    The dude that ordered that beautiful truck with a mile long bed should be neutered with no anesthesia, jus sayin!
  7. Fastduramax

    BBC 489 build

    Craig your BBC knowledge makes me shiver with honor, I'm tuned into this thread like the last episode of Yellowstone, better yet SOA :happy160:
  8. Fastduramax

    Brought home my first square body. 1980 Silverado C10. Utah

    Hey JD what's up with the angry emoji in my posts lately did I somehow offend you ???
  9. Fastduramax

    Thread sealant on header bolts?

    I highly recommend studs, ARP makes the best kits I did stainless on the 572, and yes liberal Permatex anti seize or as I used ARP torque lube…
  10. Fastduramax

    Icing on the cake !!!

    It still thumps for sure just not super aggressive, learned my lesson building 383’s over the years, I over cammed a couple and they absolutely sucked driving around town…
  11. Fastduramax

    Icing on the cake !!!

    Well yeah !!!! If it were going in a car it would have well over 800hp but I cammed it correctly for a 4500 pound 4x4, dropping it in the truck in my avatar
  12. Fastduramax

    Brought home my first square body. 1980 Silverado C10. Utah

    What everyone said haha ! This place has the best advise on the interweb ! That thing is an effing treasure and AC truck to boot ! That would be my daily driver !
  13. Fastduramax

    Ultra Grey jip

    Jive Turkey !!!
  14. Fastduramax

    Icing on the cake !!!

    On the local parts store subject no not really, most all of our locally owned mom & pop shop parts slash auto repair businesses were owned by the parents of dudes and gals I went to school with and have been sold or handed down the the eldest brother, then sold to Advanced Auto, Auto Zone...
  15. Fastduramax

    Icing on the cake !!!

    Thanks Matt, I just snagged 3 different shapes off FleaBay, none mentioned Vortec but one of the shapes is bound to work...
  16. Fastduramax

    Icing on the cake !!!

    The one I bought was preformed and was used on all the older big blocks, the angle screws me it kinks the hose to much... That said the fancy stainless NPT heater hose adapters are extremely long, maybe if I could find some cheap brass very short NPT to barb fitting it would solve the kinking...
  17. Fastduramax

    Icing on the cake !!!

    Looking for suggestions here I'm having over thinking brain block... First pic is a "preformed" bypass hose from Summit that worked perfectly, second is the angle of the Bro-Flo and this same hose will not work, nor will the nice soft silicon hose I bought, pay no attention to that 45 fitting it...
  18. Fastduramax

    Icing on the cake !!!

    Here is a little gasket info, long story short use your head manufacturers gaskets if they offer them, in my case AFR heads AFR gaskets ! The pics will show you how poorly Fel-Pro and Edelbrock gaskets line up, also those AFR gaskets are the highest quality I've personally ever seen... I opted...
  19. Fastduramax

    Icing on the cake !!!

    I hate posting pics of unfinished business but couldn't help myself so here it is... I meticulously replaced my Sniper with the Pro-Flo XT, at the time of the build this particular unit was not available so I slapped the Sniper on, I'm adamant about tuning and initial break in on the Dyno so...
  20. Fastduramax

    Candy store skore

    I used Milodon oil pans, pump pickups and windage trays on every 383 I've glued together very good stuff !
  21. Fastduramax

    Lokar Case Mount Shifter, Boot & Selector

    $500 Shipped
  22. Fastduramax

    Yukon 4.10 Ring & Pinion

    $425 Shipped $400 Picked up...
  23. Fastduramax

    Show your sick toy !!!

    Look at that little $hit lean into the corner that little F***er is all business.... :rotflmao:
  24. Fastduramax

    Borgeson K10 Quick Ratio Price Drop !!!

    :rotflmao: No worries I am in very good standing with the Uranus UPS Chapter (I know who killed Kennedy)
  25. Fastduramax

    Show your sick toy !!!

Latest posts

Forum statistics

Threads
45,961
Posts
997,031
Members
39,165
Latest member
twitch1989
Top