Search results

  1. dragstews

    GMC-IH

    Can't hurt none ... This may also be a good idea .. ^ The Original NP205 / NP203 PTO support kit. After several customer requests for a simple means to support their 205, we are now offering a solution. Use this to help prevent your factory adapter from cracking under load, or use this with...
  2. dragstews

    GMC-IH

    Just a little short .. Six inches short .. The strut rod was made for the THM 350 trans and NP 203 transfer case .. With the 4L85E and two adapters now in play got a whole new ballgame .. The 75 K15 never had the strut rod, figured it might come in handy ..
  3. dragstews

    GMC-IH

    Took a long while hunting up the parts to see this come together .. ! Sure has a busy look going on ... Only one knob is along for the ride (At the moment) the rest serves a purpose ..
  4. dragstews

    GMC-IH

    New game plan on making the extension ... This way the groves will go all the way down the adapter ... Should net a better look ??
  5. dragstews

    GMC-IH

    Steering column is soon to be done, was needing to run the wires for the cruise control down inside it .. Got a unit on order .. Also the parts for completing the dashboard are down to one item yet to nail down ... Was running some "Mickey Mouse" on the wiper switch knob in order to blend in...
  6. dragstews

    GMC-IH

    Well, it's like saying bye to a old friend .. Sold the THM 400 trans that was in the Binder ... It served me well for many years .. Here's it's new home ... 800 HP ... New owner going to install a trans brake and a 5,500 rpm stall converter and go sling some mud !! Showed him my 4X4 and...
  7. dragstews

    What have you done to your square lately??

    What have you done to your square lately?? Made it round ...
  8. dragstews

    TH 400 needed

    I have one for sale ... Built it long ago, got a world of goodies in it .. Still works as good as the day it went on line .. Reason why I pulled it was to replace it with a 4L85E .. Not for sale anymore ... Just sold it .. This will be it's new home ..
  9. dragstews

    GMC-IH

    Moving on to the wiring ... Since there will be a boatload of wires going though the firewall I got this ... Drilling a 1-1/2" hole in the wall for all the shi ... errrr stuff to go though, then this chuck of billet will cap the hole and the wires has a 1-5/8" grommet hole at the bottom ...
  10. dragstews

    GMC-IH

    Magic 8 Ball said too .. ... Lol ...
  11. dragstews

    GMC-IH

  12. dragstews

    GMC-IH

    Thanks Man .. Was wanting to see a better color match, but that's not in the cards ... Don't want too, thinking about reshooting the dash, that was a job the first time around !
  13. dragstews

    GMC-IH

    Note the button in the tilt lever .. Remember the power cowl vent ? Almost done with the column ...
  14. dragstews

    GMC-IH

    Getting trick with the column .. Steering wheel soon to be mounted to the adapter .. Also got the tilt lever with a switch in the end of it to install on the column .. It controls the power cowl vent ..
  15. dragstews

    GMC-IH

    Sure has been a major chore working the column from one end to the other .. Do think once it's installed back in the truck and grinning like a alligator, it'll be worth the effort and expense ?
  16. dragstews

    np203 shifter

    Seen a few for sale on eBay .. Fortunately mine still was working good .. Made a over the top of the trans mount to relocate it forward for the needs I had going on .. Made it to look like the trans shifter .. Trans shifting is a column shift ..
  17. dragstews

    Tilt Steering Column

    That's what I did ... Running a 75 Cadillac Coupe De Ville column on a 75 K15 .. Being both are GM (From the same era) the wiring plugged up with no mods .. In the mode of installing a custom steering wheel on it at the moment .. Which required a special adapter for the telescopic...
  18. dragstews

    GMC-IH

    Got a idea on how to go about hiding the one inch gap .. Do a counter bore down into the adapter with a slight press fit for the Oem Cadillac sleeve ... Gap be gone .. ! The horn parts was a bit of work to load into the adapter .. Holes didn't line up plus the hole for the plastic nose...
  19. dragstews

    GMC-IH

    Since the old Binder had seen some fat added to the body thought was to fatten up the steering wheel .. Keeping the dark walnut look ... I do like the wood and black leather wheel, but this one has "Beef" written all over it .. Well ... Since I was undecided on which steering wheel to...
  20. dragstews

    GMC-IH

    Jumping Jack Flash ! Finding a adapter was a major chore ... Had to be able to work the telescopic lever ... Found one that had the right dimensions for the Raptor's bolt pattern ... Getting a few bucks wrapped up in this tricked out column ... Close to 9 C-notes so far .. Eek If my labor...
  21. dragstews

    GMC-IH

    Thanks squaredeal91 Sure has been keeping me busy for dang sure .. Wanted the Eldorado steering wheel cause of the wood grain on it, but soon realized that wasn't going to happen ... A wheel cover with wood grain wasn't going to look all that good so I started looking at aftermarket wheels ...
  22. dragstews

    GMC-IH

  23. dragstews

    GMC-IH

    Buzzer switch came in, installed it and finish putting the column together but for the steering wheel .. It needs some clean up before it goes on ... Couldn't find a Eldo wheel (That i could afford) so the old wheel will be going back on .. It works ... Guess there's not many 54 IH...
  24. dragstews

    GMC-IH

    Wire it up to the subwoofer .. Lol
  25. dragstews

    GMC-IH

    Ya know what ..? Think i'm going to get a wee bit fancy and do my own key alarm sounds ...

Latest posts

Forum statistics

Threads
45,962
Posts
997,134
Members
39,170
Latest member
Lonestar33
Top