Search results

  1. Ontheboulder

    Need honest quote for this truck, not a I know what I have?

    I would say 2-3k if it runs ok. I gave 2400 for mine 2 years ago not running,but it was rust free and straight.
  2. Ontheboulder

    LED question cluster

    I changed all my dash lights to LED,even the turns,all work fine and they do dim down.
  3. Ontheboulder

    turn signal switch install

    Well, since all roads for non working brake lights have led me to the turn signal switch. I am thinking about trying to replace it my self. I haven't done one in nearly 35 years and that was on my old 72 chevy. pretty simple steering column back then. I hope this will work out good! Any one got...
  4. Ontheboulder

    power window relay mod

    howdy!! I just did the relay mod for the power windows on my 87 gmc. LMC sells a kit and it is very easy to hook up, worst part is fishing the wires thru the door boot into the cab, I used a coat hanger and had good luck. It works very well!
  5. Ontheboulder

    stiff TBI pedal.

    anyone else had a stiff pedal issue with TBI throttle? anyone got any solutions?? 1987 GMC 2500, 350 . last one I had was the same way even after replacing the cable. Thanks
  6. Ontheboulder

    brake lights no worky!!

    it was only 21.00 at LMC, and it specified with tilt wheel. NAPA and autozone didn't. all made in China these days anyway.
  7. Ontheboulder

    brake lights no worky!!

    I replaced a turn signal switch in my old 72 chevy years ago, but it didn't have the tilt,locking wheel and the multi function junk to deal with!!
  8. Ontheboulder

    brake lights no worky!!

    just ordered a new switch, gonna take to my friends shop who does this stuff for a living and let him do it. My luck I would have an even bigger headache!!
  9. Ontheboulder

    brake lights no worky!!

    nope!! I added some extra grounds, bed to frame, cab to frame,still no power to the brake lights. tried the wiggle on the turn signal and 4 ways, cleaned all the ground points---again!
  10. Ontheboulder

    brake lights no worky!!

  11. Ontheboulder

    brake lights no worky!!

    Before I changed the flasher, I had the left brake lights working,but not the right. Also did not have right turn signals. Once the flasher got changed, I got both turn signals working but have no brake lights,even on the left side that once was working.
  12. Ontheboulder

    brake lights no worky!!

    I put the old flasher back in place,nothing changed
  13. Ontheboulder

    brake lights no worky!!

    With brake pedal depressed,I have tail lights,turn signals,and 4 way flashers! No brake lights.
  14. Ontheboulder

    brake lights no worky!!

    I I have completely disconnected the rear lights from the front of the truck.no brake light power.
  15. Ontheboulder

    brake lights no worky!!

    thanks, I have checked all the points you mentioned and all are good and clean,the baffling part is that I had the left rear brake light working until I changed the turn signal flasher. since then, no brake lights even when putting the original flasher back in
  16. Ontheboulder

    UPDATE! Need expert opinions on 86 or 87

    the main thing I have noticed with the TBI is a stiff throttle pedal,both of the 87's I have owned seem to have that issue,
  17. Ontheboulder

    brake lights no worky!!

    well after a day of checking grounds, checking connections, and re-checking, I think this truck is gonna need a new turn signal switch!! oh JOY! That's where everything is leading to. with all the wires going to the rear working with the exception of the brake lights, i think that's where I am...
  18. Ontheboulder

    winter time project!!

    I went with 18" wheels, mainly cause I got a screamin deal on the tires, but also seems they are phasing out the 16 in tires since all the new rigs are coming out with 18 - 20 inch wheels. I think I will keep the same colors but re paint in a satin finish
  19. Ontheboulder

    winter time project!!

    Nice lookin rig ya got, hopefully I will get a paint job on mine some day, Do you know Coby Foust from the e- company?? he has his own company up here Foust Fabrication and Erectors
  20. Ontheboulder

    winter time project!!

    I was there when Rick was working for Ness, I retired in 2013 june ,
  21. Ontheboulder

    winter time project!!

    could be, greg hogan is probably the greg you are talking about, he retired before me,I heard about that, but don't think i was there on that job. I was on ness 180 lattice boom for awhile then drove truck cause my neck got so bad from looking up all day. Doug Yuckert and I were on the 180...
  22. Ontheboulder

    brake lights no worky!!

    Yup,that’s what I am thinking,that the switch is toast.got good power out of the brake switch but not going thru the turn switch
  23. Ontheboulder

    brake lights no worky!!

    Yup checked that a few times
  24. Ontheboulder

    winter time project!!

    Ha ha thanks! Been out 9 years after 25 with Ness in Seattle,don’t miss it at all!
  25. Ontheboulder

    brake lights no worky!!

    thanks to you all!!! tomorrow will be check ,double check and re-enforce all the grounds,If that fails I think I will start drinking heavily!! LOL

Latest posts

Forum statistics

Threads
45,956
Posts
996,947
Members
39,158
Latest member
cutlerfab
Top