Search results

  1. MrMarty51

    Partial VIN frame - can anyone read this

    Take a piece of 400 grit sand paper, staple it to a stubby 2X4 block of wood and try sanding the high spots, that should make the numbers pop right out atchyuh. :Caffeine:
  2. MrMarty51

    Newby in Western Wisconsin

    :welcome:
  3. MrMarty51

    6.2 diesel hp

    The Cummins would take a LOT of chopping and hacking to get enough room for that tall long block. Not so much with the 6.2.
  4. MrMarty51

    6.2 diesel hp

    You wont achieve high numbers from a 6.2, its just not in the web design of the blocks main bearing areas and the cranking shafts to be able to do that. There is a lot of things You can do to achieve a higher number of horses though, like, a block web girdle to help hold things together and then...
  5. MrMarty51

    2001 YZ 250

    Yeeeeouch. I hope You can get it all sorted out and back together. I have used that Hobart aluminum stick welding rod and the OXY/ACETelyne torch to repair aluminum components, it will also work with a butane torch to, like the bernzomatic. There too is other aluminum stick on the market that...
  6. MrMarty51

    Lotos MIG 140 Welder

    I`m wondering if that welder unit was built by Hobart ? Looks mighty similar to the 110V Hobart 135 that I have in the garage. Having the capability to weld aluminum without having to fire up the torch would be a nice option.
  7. MrMarty51

    Options for beds - aftermarket, used, new, substitutions

    Eastern Montana if You are up for a road trip. There was several of them in the various fakebook buy/sell sites. Miles City virtual market place, Glendive Montana Man Cave, Eastern Montana Man stuff, and a load of others that I am a member of. No rusty wehicles over here, unless they came from...
  8. MrMarty51

    '73 Chevelle SS Wagon (local find)

    I`d be dragging that car home then, asking for forgiveness. :Caffeine:
  9. MrMarty51

    What is this out of?

    :lol::grd::lol:
  10. MrMarty51

    Speed nuts?

    Get some J-B Weld called Plastic Bondo or some such, that`ll hold them nubs back on there.
  11. MrMarty51

    Diesel Brothers build a Square for Wet Sounds

    That's nice. Is that one they are throwing out for a give away ?
  12. MrMarty51

    PCV valve rattle when running

    With bad hearing, it makes all the rattled go away, squeaks too. :Caffeine:
  13. MrMarty51

    750

    DOT over here had a tire balancing rig that`d spin the tire up to probably about 50 or 60 MPH, not sure but it was pretty fast. A mark was made on the tire before spinning and there was a timing light affair with a sensor on it that hooked to the axle, tire was spun, then take note of the...
  14. MrMarty51

    750

    Oh darn. I was hoping to see the other muscheen all fired and running sweet.
  15. MrMarty51

    I ruined the yellow truck.

    Good that You did not have to replace the cam shaft and got it running without a lot of grief. If the 250 is anything like the 292, the cam gear is pressed onto the shaft and requires a press to install a new gear or, remove/install the old gear.
  16. MrMarty51

    I ruined the yellow truck.

    :happy160::happy175::happy175::happy175::happy175:
  17. MrMarty51

    might buy this 82 k20 4x4 6.2 detroit and become a member...

    A rough pic of the old unit. The one magnet for the drive shaft is there and is not that big of a maget.
  18. MrMarty51

    might buy this 82 k20 4x4 6.2 detroit and become a member...

    Yeah, this CC system looks to be ancient. It has two magnets that's suppose to hook to the drive shaft. I took a peek at it and see one of the maggots, I mean magnets is missing. I dont know if just any magnet would work. Unit is probably not worth the freight to get it mailed.
  19. MrMarty51

    Let's play "Name that electrical connector" !

    :happy160::happy175::happy175::happy175:
  20. MrMarty51

    might buy this 82 k20 4x4 6.2 detroit and become a member...

    I have a box over here that has a DANA universal cruise control unit in it. I know nothing about it other than it does have the instruction book. It had been previousely installed on a vehicle but I dont know what brand or anything about the CCs history. it was in with several tools I had bought...
  21. MrMarty51

    Let's play "Name that electrical connector" !

    Before You plug that wire in and blow the whole truck to smithereens, You send the truck over to Me with the signed and notarized title and I`ll keep You out of harms way when I plug in the wire. Heck fire man, I`ll even drive over with the truck and a trailer and haul it all the way back here...
  22. MrMarty51

    might buy this 82 k20 4x4 6.2 detroit and become a member...

    Bio requires a heater to keep it flowing, I think even in moderate temps. Do the study then decide. Used motor oil can also be filtered down and be burned in a mix of diesel. Let it settle out for about two weeks to a month then filter it through four filters and mix it with the diesel. I always...
  23. MrMarty51

    What have you done to your square lately??

    I`d a done the same and more for You and any member of the GMSB forum. :Caffeine:
  24. MrMarty51

    might buy this 82 k20 4x4 6.2 detroit and become a member...

    I dont know much about bio fuel but from what I have read it is not the best of options. In colder weather I believe it requires a heater to keep it liquid enough so it can be pumped. I just dont know enough about it so be sure to do the study.
  25. MrMarty51

    What have you done to your square lately??

    I dont know if I can still be a member in this forum. I having some health issues dont have the energy to do any fixing on the projects that have been setting in the yard. My 78 K20 had been setting for a couple of years without being started. A couple of weeks ago a guy wanted to buy all the 59...

Latest posts

Forum statistics

Threads
45,961
Posts
997,031
Members
39,165
Latest member
twitch1989
Top