Search results

  1. C

    What gears

    Its your money... 14 bolt for the front just to go camping on 35" tires is overkill. There are a ton of 6500 pound jeeps rock crawling on 37's with only D44's. Theres also a ton of the later model jeeps on 38's 39's and 40's that survive on pavement just fine, AKA Mall Crawlers
  2. C

    Speaker pods/General stereo questions

    I'm sure there is a way to test cables for RFI but I would just run what you got and accept that you may need to replace them
  3. C

    Speaker pods/General stereo questions

    ^^^^ This Home theater patch cables often times do not have as much RF shielding which causes them to be slightly susceptible to RF ingress/egress. Other than the shielding most of the home stuff doesn't have as much insulation (padding) which may make them more susceptible to damage from...
  4. C

    New from Cali

    I can't remember where I found it exactly, but I printed a California BAR Engine Swap guideline book from the interwebs. It had loads of good info on what does and does not need to cross over during the swap process to meet the requirements of the state referee. I ended up using an ECM out of...
  5. C

    New from Cali

    Welcome, from California too
  6. C

    New member, Australia

    Welcome from California
  7. C

    Exhaust Question

    What would a 19 year old @Ken B say to you if he had the chance? Save a few bucks or go buckwild… Dual 2.25” & a set of turbo mufflers sure do make a stock small block sound good
  8. C

    K5 Blazer Shift Indicator

    Have you programmed your GSS-3000 yet? Mine was a PIA, the arm on the sender was a little loose and caused an error every time I tried. Took me a few days to figure out.
  9. C

    Recommend Me a Reliable/Budget Serpentine Kit

    General Motors… A serpentine set up from a GMT 400 (either the 88-95 or the 96-99) can be had for nearly no money from a wrecking yard. A little elbow grease and some paint they’ll be good as new. all of your components and belt are able to be replaced with commonly available parts. Here...
  10. C

    Starter Wiring Issues

    EDIT: @75gmck25 beat me to it My truck never had the wire to the coil like @Ricko1966 mentions, Dad tells me that’s a pre HEI thing. 1 heavy gauge from big lug on solenoid to battery 1 Purple 10 ga from ign. Switch to “S” 2 10 ga red wires to harness & alternator hook to the lug for the...
  11. C

    Forward Cab Spacers

    Rubber rides softer but poly is allegedly tougher
  12. C

    Forward Cab Spacers

    I bought the Goodmark ones from Summit, they seem high quality.
  13. C

    NP241-C, non VSS. Can I convert to VSS or no. No luck!!

    Tail housing I would go for the kit @vr1967 recommended. I did a homemade version for free but already had the reluctor wheel and sensor and got my tail housing welded for free. That kit wasn’t available when I was trying to figure it out…
  14. C

    Period correct wheels for 86 K10 Stepside?

    Front springs are definitely aftermarket, too many leafs and stock springs are nearly flat when the vehicle weight is on them. I can’t really tell much about the rear from the picture
  15. C

    241c or stay with the np203

    Which ever one you can get a matching 208 for…
  16. C

    Replace sm465 with a different type

    How do you intend to use the truck? Daily driver? Mud bogs? You gonna take it up the Rubicon? When you request options that “will hold up” it leaves room for interpretation. I don’t know of any 4 or 5 speed available that will be as simple or tough as the 465/205 combo you have. I ran the...
  17. C

    What new tools have you got lately?

    “New” used TIG machine!
  18. C

    1996-2000 truck stock Cast iron exhaust manifold on 1985 C10

    GMT400 Vortec exhaust manifolds fit just fine, I threaded a pipe plug in the EGR port and ground it smooth before painting them. ETA: There are a ton of these manifolds available for cheap that are still in great condition
  19. C

    Rally wheel colors?

    Cool thing about rally wheels… If you paint them any color other than argent silver and decide you don’t like it, just repaint them again. I went with a metallic blue as a teenager way back in the 1900’s to add a splash of color to my truck. Did them the exact same color this time.
  20. C

    Have you checked your ground?

    My ground is compacted road base
  21. C

    Tahoe/Silverado Bench install

    Second row bench seats from late model Tahoe’s are a dime a dozen because they get stripped out of police cars and replaced with hard plastic units
  22. C

    Steering Column needs to be rebuild

    Well Sir… As far as I can tell the armored cover shouldn’t prevent disassembly, My column doesn’t have the C/C turn signal stalk though so that may be different. Remove: Wheel Lock plate Turn signal lever (older ones are just held on by a Phillips screw) Turn signal switch Tilt lever (older...
  23. C

    Steering Column needs to be rebuild

    We need pictures...
  24. C

    1980 K20 Square to Round Headlights

    Blasphemy… Just kidding, the core support on mine looks like it would accommodate round lights. You’ll probably need the bezels, buckets, headlamps and parking lights, not totally sure though
  25. C

    Hello from western PA

    Welcome from California... I've got a 1980 "Squircle" too

Latest posts

Forum statistics

Threads
45,947
Posts
996,602
Members
39,141
Latest member
jbwhitford
Top