Search results

  1. Ron Sebastian

    Method 701 milled aluminium rims

    I showed her that too, oh hell no!
  2. Ron Sebastian

    Method 701 milled aluminium rims

    Looks like it's a no go for the Method wheels. Old lady gave the matte black a thumbs down.
  3. Ron Sebastian

    I have a feeling this is going to get expensive.

    It starts around 35 mph up to about 55.
  4. Ron Sebastian

    Method 701 milled aluminium rims

    Going through all the possible reasons for my vibration. When I watched the tire guys road force balance them, the welded steel rims appeared to be a little wobbly. Wouldn't mind a nice milled aluminum straight wheel.
  5. Ron Sebastian

    I have a feeling this is going to get expensive.

    I try not to imagine it too much either!
  6. Ron Sebastian

    I have a feeling this is going to get expensive.

    I have seen this video, thanks. That is why I installed the pinion shims to get the angles right. I will try to flip the driveshaft/yoke and see what that does.
  7. Ron Sebastian

    I have a feeling this is going to get expensive.

    So far I have changed tires and had them road force balanced with weight hammered onto the rims, not the little stickers ($1100). Went through two sets of tires, so thinking they are good but the rims are suspect. Then changed all steering tie rods and ball joints ($1200). Just finished adding...
  8. Ron Sebastian

    Method 701 milled aluminium rims

    Thinking of putting these on. $333 each. Anyone have a thought? I thought they would look great on the black square.
  9. Ron Sebastian

    Before you string me up ..

    Before I have to hear it from someones Aunt on this site about torque and old U bolts, I got new U bolts coming.
  10. Ron Sebastian

    Before you string me up ..

    Redfish, Called the Skyjacker guys and did not find them as helpful. Did you have to order longer U bolts? I ordered some Superlift U bolts (3318) and hope they work, if not the project may take a little longer.
  11. Ron Sebastian

    Before you string me up ..

    Redfish, Just wanted to confirm with you, The Skyjacker Soft Rides you got are 47" long, 2.5" wide and give you about a 3"lift. The part numbers are C125S correct?
  12. Ron Sebastian

    Before you string me up ..

    Going for the 2.5 Skyjacker. Cannot afford one more inch of lift or it won't fit past the 7' garage door.
  13. Ron Sebastian

    Before you string me up ..

    Eric, I replaced all the bushings last year with ORD kevlars and greaseable bolts. The present project is to install pinion shims in the back to change the driveline angle and hopefully get rid of an annoying vibration. Then get rid of the blocks in the front with soft ride springs and by the...
  14. Ron Sebastian

    Before you string me up ..

    Tires are 33s no blocks in the back, only in the front.
  15. Ron Sebastian

    Before you string me up ..

    DVD, did you read the OPs first post? I'm assuming you just look at pictures. I am asking a question that will fix my block issue. Your post is no help.
  16. Ron Sebastian

    Before you string me up ..

    Grit, not sure of lift in back. I don't know what stock height is. Getting ready to put 4 degree pinion shims in rear, so that might add another half inch. I don't think Skyjacker makes a 2" softride leaf. I'll have to wait to get measurements.
  17. Ron Sebastian

    Before you string me up ..

    I can't make out the part number from your pic. Skyjacker site only shows those springs for CJs.
  18. Ron Sebastian

    Before you string me up ..

    From all I have read the 2.5 Skyjacker leafs will probably work the best for keeping the truck stance about the same and provide a good ride. I'll let you know.
  19. Ron Sebastian

    Before you string me up ..

    The pic shows the front higher but it is really fairly level. I'm sure the rear springs are not stock either.
  20. Ron Sebastian

    Before you string me up ..

    I bought the truck this way years ago. It hasn't killed me yet. I would like to get rid of the 3"of blocks in the front. Is it safe to say 3" lift leaf springs would provide the same lift so everything would still line up as it is now? Is Skyjacker or other better for a more comfortable ride?
  21. Ron Sebastian

    Re-badging my Square

    I don't think I'll get less for it.
  22. Ron Sebastian

    Equal - Tire Balancing Beads, No weights to Lose

    Just to revisit this post. My tire guy told me if the big tires sit too long they develop flat spots. The beads will find those flat spots and will make matters worse. Any truth to this?
  23. Ron Sebastian

    Replacing front steering components question

    Thanks all!
  24. Ron Sebastian

    Replacing front steering components question

    DVD, yes, thanks. Looking for a place that sells a new one. Can't seem to locate one. Center adjusting tube that is. #2 in the pic.
  25. Ron Sebastian

    Replacing front steering components question

    I'm in the process of ordering new Tie Rods and Ball Joints and came to the Center Link Adjusting Tube. I know that it should come off with no problem, but concerned if I have to destroy some threads. I can't seem to find that item anywhere. I'd like to know there will be a bridge to cross if it...

Latest posts

Forum statistics

Threads
45,939
Posts
996,495
Members
39,139
Latest member
meizy
Top