Search results

  1. bigcountryguy19

    My Truck (and wife) story - and restoration...

    Great story, nice lookin truck also. Have any future plans for it? Sent from my iPhone using Tapatalk
  2. bigcountryguy19

    Fresh big block with low oil pressure at idle.

    Maybe try just putting a set of new lifters in, since it was pouring oil out of the one rocker, seems like there is something going on with that one component. Doesn't matter were it loses oil, it should still affect oil pressure, like a pipe with 50 spigots, no matter where you turn one on, the...
  3. bigcountryguy19

    should i lift it??

    I really like the seat, what did that come from? Sent from my iPhone using Tapatalk
  4. bigcountryguy19

    700r4 Intermittent Lockup or None at all...

    I agree with hot rod, I had this problem in a truck I had, I replaced the converter and the O ring on the imput snout and it fixed the problem Sent from my iPhone using Tapatalk
  5. bigcountryguy19

    knuckle and tie rod questions

    I had to grind mine also, some aftermarket ones are not rounded and don't fit through the hole. I have had no ill effects from grinding the sides a bit. Sent from my iPhone using Tapatalk
  6. bigcountryguy19

    should i ruin the patina

    I think 4 grand is a more than fair price. Try puttin it on eBay, you could reach out to a lot more potential buyers. Sent from my iPhone using Tapatalk
  7. bigcountryguy19

    New Member from Texas - Baron

    Welcome from west side of Houston Sent from my iPhone using Tapatalk
  8. bigcountryguy19

    New Girl from WIsconsin

    Welcome! Sent from my iPhone using Tapatalk
  9. bigcountryguy19

    Water in my Diff..

    If you used a pressure washer I would definitely use wd to clean out the water, be shure to spray it real good in the oil path that goes to the pinion bearings. The front diff still looks pretty crusty IMO, but seein is that it only gets used once in a while it should be ok if the bearings are...
  10. bigcountryguy19

    Water in my Diff..

    Oooooh that's nasty. Rear one will Probobly be fine, I'm willing to bet the bearings in the front are pitted up. Sent from my iPhone using Tapatalk
  11. bigcountryguy19

    6.2 diesel j code for sale

    I tried selling them on several sites and locally also. I needed the space back in my garage. I hate scrapping stuff like that but had no choice. Sent from my iPhone using Tapatalk
  12. bigcountryguy19

    6.2 diesel j code for sale

    Scrapped! Sent from my iPhone using Tapatalk
  13. bigcountryguy19

    Question about tranny

    Ok, well I will let him go through the hell I went through to figure it out then. Sent from my iPhone using Tapatalk
  14. bigcountryguy19

    Question about tranny

    The lockup circuit is differant also, I did the swap in my truck. The later transmissions need an imput from the computer to lockup. I bought a kit off eBay that replaces the wiring in the pan, along with the pressure switch for fourth gear. That way it only locks up in fourth. Sent from my...
  15. bigcountryguy19

    6.2 diesel j code for sale

    FREEEEE!!!!!! To who wants them! Sent from my iPhone using Tapatalk
  16. bigcountryguy19

    6.2 diesel j code for sale

    Had to pull the running diesel out couldn't wait till it sold. Do any of y'all have a use for them? I would be willing to give them to one of y'all that would actually use them. I would rather give them away than scrap them. Sent from my iPhone using Tapatalk
  17. bigcountryguy19

    air cleaner

    If I remember correctly it goes to the valve cover. Sent from my iPhone using Tapatalk
  18. bigcountryguy19

    more expedition pics

    I would love to have land to go so that on Sent from my iPhone using Tapatalk
  19. bigcountryguy19

    another "Whats that noise?" thread

    What is your oil pressure? I noticed from the vid that oil is not flyin of your rockers and makin a mess everywhere. Could be oil pressure related and causing your lifters not to pump up, therefore giving you the clattering sound. IMO it could be a bad oil pump or a blockage somewhere. Oil...
  20. bigcountryguy19

    Saving a 84C-10 (I hope)

    Welcome, nice truck! Sent from my iPhone using Tapatalk
  21. bigcountryguy19

    How To Refurbish Your Dashpad

    Talk about wood grain lol Sent from my iPhone using Tapatalk
  22. bigcountryguy19

    lift help!

    35" tires usually fit a 4" lift with no rubbing as long as they are not super wide. IMO the 7" you have should fit the tires you have, from centerline of wheel, ur tires are only 2.5" taller than 35" tires. So the body lift is compensating for the extra tire size. Sent from my iPhone using...
  23. bigcountryguy19

    lift help!

    Those are stock rear springs. So it most likely has a 4" suspension lift. Along withe the 3" body Sent from my iPhone using Tapatalk
  24. bigcountryguy19

    lift help!

    Then why would it have 4'' lift blocks in the rear? You had said the tires don't clear and rub I thought? Sent from my iPhone using Tapatalk
  25. bigcountryguy19

    What is broken and how do I fix it?

    I'm pretty shure they make a rebuilt kit for it, I believe the technical name for it is a cardone join or something like that, a friend of mine said its a pain to put together with the spring that goes in there, but might be worth lookin in to.

Latest posts

Forum statistics

Threads
45,581
Posts
986,840
Members
38,672
Latest member
Knightewulf
Top