Search results

  1. MrHorsepowerLSx

    K5 Blazer 2 into 1 exhaust system with headers.

    I forget exactly where I saw this, but it was a truck being sold online and I was admiring what a nice job they did on the exhaust system
  2. MrHorsepowerLSx

    Goodwrench crate engine smoking from passenger side exhaust

    The finger test proves nothing for diagnosis. It could be 20psi and feel like a lot of compression when it blows your finger off the hole. Just report back to us when you start getting some numbers ;)
  3. MrHorsepowerLSx

    Goodwrench crate engine smoking from passenger side exhaust

    It might not be oil, it could be mixture of rich gas/soot and condensation forming inside the pipe being carried to the tail pipe when you gave it the beans. Hook a vacuum gauge up to and see if you have a steady needle at idle. There is a sticky in this section about using a vacuum gauge. Also...
  4. MrHorsepowerLSx

    Backfiring after new plugs installed

    Silicone jelly is really called Dielectric Grease, it’s purpose is to Protect electrical connections and wiring from salt, dirt and corrosion. It helps extend the life of bulb sockets. It Prevents voltage leakage around any electrical connection, it can also prevents spark plugs from fusing to...
  5. MrHorsepowerLSx

    Backfiring after new plugs installed

    That’s great to hear. Keep on truck in’ :cheers:
  6. MrHorsepowerLSx

    Backfiring after new plugs installed

    The motor will start…….. but it wont be happy, usually they give immediate tell-tale signs of sputtering and fire balls through the intake
  7. MrHorsepowerLSx

    Backfiring after new plugs installed

    Popping the hood and looking at the motor the cylinders will go like this…….. Note: cylinder 1&2 are going to be the closest to the accessory drive Drivers side cylinders goes as follows 1-3-5-7 Passenger side cylinder goes as follows 2-4-6-8 Find the number 1 position on your distributor cap...
  8. MrHorsepowerLSx

    Steering column guru’s, where does this spring go??

    Thank you :cheers:
  9. MrHorsepowerLSx

    Steering column guru’s, where does this spring go??

    That little spring is currently in place I think I figured it out. It is for holding the key alarm warning switch in place, but if I’m wrong please correct me
  10. MrHorsepowerLSx

    Steering column guru’s, where does this spring go??

    The other location it could live in is where the key warning alarm switch goes as a retainer. It was a thought that just popped into my head. They are both similar in size
  11. MrHorsepowerLSx

    Steering column guru’s, where does this spring go??

    This fell out of my steering column as I I removed it from the truck. The column is being torn down for restoration and I’d like to know where this goes. The only place it looks like it could go is for the locking bar that operates the ignition switch in this part of the column. Thanks all
  12. MrHorsepowerLSx

    What’s IT Worth? (Post all “what’s it worth threads here)

    @Frankenchevy I’m not selling them at the moment. They came of my 79 K35
  13. MrHorsepowerLSx

    What’s IT Worth? (Post all “what’s it worth threads here)

    D60 Dog dish hub caps, I’ve been holding onto these for almost 20 years. Forgot all about them until the other day
  14. MrHorsepowerLSx

    WANTED: EGR 350 Intake

    @AyWoSch Motors nice collection of intakes you have there
  15. MrHorsepowerLSx

    Post to for sale forum?

    That’s the best post answer in here! I chuckled out loud reading it, just sayin’ lol
  16. MrHorsepowerLSx

    What kind of tool box do you have at home??

    @nvrenuf If you wrench for a living it is a nice investment to make and a sound piece of mind knowing that you can put ALOT of weight in the drawers without any worries of failures. I took a management position where I work so I no longer needed to keep my tools there. I must say it is quite...
  17. MrHorsepowerLSx

    What kind of tool box do you have at home??

    @nvrenuf My home box is a Snap On KRL 1023 triple bank. If you want 2 huge drawers look at the KRL 1022. It is the same dimension as my box, but the first 2 drawers go all the way across. My box is also a limited run in color, it is a wrinkle finish box and the color is hammer blue, but the...
  18. MrHorsepowerLSx

    What kind of tool box do you have at home??

    I’ll play along
  19. MrHorsepowerLSx

    FNG saying hi

    Welcome from NJ, nice project you got there
  20. MrHorsepowerLSx

    86 C10 454 SWAP

    Does your 12v power source leave the distributor while cranking? Remember it needs to be constant 12v until you turn the key off
  21. MrHorsepowerLSx

    YAY!! Another FNG....lol

    Welcome from NJ….. I thought it was an 80 only grille o_O
  22. MrHorsepowerLSx

    New member and questions about my truck

    Welcome
  23. MrHorsepowerLSx

    New Member

    Welcome from NJ
View older results

Latest posts

Forum statistics

Threads
45,570
Posts
986,620
Members
38,663
Latest member
seattlesquare
Top