Search results

  1. M

    Ford NP208 Interchange / 27 Spline Output Shaft Th400

    If you have a TH400 it has 32 splines. So you need a 205 from an 81 and newer truck any crew cab or 3500 truck will have it for sure. Needs to be from a TH400 or SM465. Make sure you grab the front drive shaft too.
  2. M

    33's on a 2" lift

    Well I guess that settles that!
  3. M

    Ford NP208 Interchange / 27 Spline Output Shaft Th400

    from what tranny ?
  4. M

    Best stock head and Aftermarket cam combo

    Yep that's exactly why they are called vortec
  5. M

    Best stock head and Aftermarket cam combo

    The cam kit includes a cam
  6. M

    Best stock head and Aftermarket cam combo

    The cam kit comes with a cam
  7. M

    Best stock head and Aftermarket cam combo

    I know :) Just saying the same thing
  8. M

    Best stock head and Aftermarket cam combo

    Ya ok so then the full Cam kit would have everything he needs.
  9. M

    Best stock head and Aftermarket cam combo

    If you bought an Edelbrock #2116 then you will have the spread bore flange just like you have now on your performer 2101 but it will fit the Vortec heads. the 12-300-4 I believe can use the stock springs but the 12-230-2 I believe requires stronger springs. I would buy the full kit for...
  10. M

    Vacuum line from air cleaner

    I disagree with your disagreement lol! :) As you know I use a winter front come cold weather. My truck actually runs better when the winter months come with better mpg. I even use the restrictor plates for the cross over. The Eddy's electric choke works well enough that I can set it to stay...
  11. M

    George's 2003 Sub "lucky7"

    Sounds like you got yourself a good woman!
  12. M

    George's 2003 Sub "lucky7"

    That's the thing, unless you buy brand new you still have to fix everything anyways. I enjoy wrenching on my old square more though:)
  13. M

    Ford NP208 Interchange / 27 Spline Output Shaft Th400

    If you flipped the case all the shifter stuff would be on the bottom side of the T-case. I don't know if it would clock into the down ward position either. Most of the internals can be reused though.
  14. M

    33's on a 2" lift

    Im not sure about the 12.5 though. I wanna say yes but they might rub just a little being that wide
  15. M

    Best stock head and Aftermarket cam combo

    Im soooo looking forward to this upgrade :)
  16. M

    Best stock head and Aftermarket cam combo

    You need all that stuff anyways and the cost of the intake is well worth the upgrade :)
  17. M

    Best stock head and Aftermarket cam combo

    With stock heads or even the first gen TBI heads you could use a Comp Cams 12-300-4 or a little more X-treme 12-230-2. Like its been said the Vortec heads all by them selves can add 50-100 HP but may require a different cam. Not sure though, because the engine blocks that the Vortec head came...
  18. M

    Ford NP208 Interchange / 27 Spline Output Shaft Th400

    I think the same era Ford drops to the drivers side :( Im not positive but pretty sure.
  19. M

    q jet high high idle and very rich

    Looks like it could use a good cleaning! Spray all the linkage down with carb cleaner and work it all back and forth so you get all the gunk cleaned off.
  20. M

    Removing a broken key?

    :):):)
  21. M

    Removing a broken key?

    How about: weld the 2 key halves back together and then simply pull it out!
  22. M

    George's 2003 Sub "lucky7"

    I bet his Woman is not afraid to be seen with him in that one! :) :) :)
  23. M

    newbie,BayArea Ca.

    Sounds like your Torque Converter lock up is staying locked except for the fact that TH400s do not have a lockup TC.
  24. M

    1976 C-10 Cooling Issues

    Yep and thanks Ceasar :)
  25. M

    Which to buy?????

    And the 87' has the wrong era rear bumper on it!

Latest posts

Forum statistics

Threads
45,570
Posts
986,494
Members
38,661
Latest member
Todd Lemon
Top