Search results

  1. custodian

    Temp Sending Unit

    Yea, So far I have all the grounds but one connected. I cranked this motor on a stand a few months back.
  2. custodian

    Oil Pressure Gauge

    Yes I know. The speedometer is from an 95 G10 with an 85ish speedometer face plate, so another missed matched gauge will not matter, looking at also changing from a Amp gauge to a Volt gauge, and I know you can't use the same wires from the Amp to Volts, will have to straight wire the Volt meter...
  3. custodian

    Oil Pressure Gauge

    Just let me know. I can pay you for it.
  4. custodian

    OUCH!

    Lowe's told me they would only honor the small hand tools, also told me I'd had to take it to a "Retailer", which I told her that's what Lowe's was, then she handed me the phone number to call.
  5. custodian

    OUCH!

    I'm thinking this vise is around 30 years old.
  6. custodian

    Temp Sending Unit

    Agree.
  7. custodian

    Oil Pressure Gauge

    Thanks. I was thinking around an 85 gauge and sender.
  8. custodian

    OUCH!

    I have a claim request in with Craftsman, just waiting to see what happens.
  9. custodian

    Oil Pressure Gauge

    I have a 73 C10 with the mechanical oil pressure gauge, and I want to switch to an electrical gauge. My wire harness doesn't support the electrical oil gauge, so can I wire the electrical gauge directly to the sending unit?
  10. custodian

    Temp Sending Unit

    I'll make sure I connect to the right wire. I'll check my PCM pinouts for the 01 Silverado. A is for the low reference to computer, B is senor signal to computer and C is for the gauge.
  11. custodian

    Temp Sending Unit

    I think I have it figured out. Looking at the plug, the bottom pin would go to the gauge, top left would go to the yellow wire in the harness and the top right pin would go to the gray wire in the harness.
  12. custodian

    Temp Sending Unit

    I watched a video on this, going to try it. I have a TPS plug I can use. Do you know which pin on the sensor is the gauge wire, and which pin goes to the Yellow and Gray wire in the harness (I'm using a stock wire harness and just cut off the connectors I didn't need and tucked them back into...
  13. custodian

    Temp Sending Unit

    What year and how would it be wired?
  14. custodian

    Temp Sending Unit

    Can anyone tell me if a temp sending unit from an 85 C10 305 V8 work with a 73 C10 gauge? I want to use the smaller sending unit in my LS swap.
  15. custodian

    Emblems. Custom deluxe and Silverado fender and dash.

    I used the diesel radiator brackets on my 85 when I switched to a 350, had to slightly modify them to fit over the CU730 radiator. The only thing I have left of the diesel stuff is the fan shroud, filler panel and the weight that was on the 700r4.
  16. custodian

    Autometer Gauges

    Can someone tell me the part numbers for all the Autometer gauges used in a gauge swap?
  17. custodian

    Emblems. Custom deluxe and Silverado fender and dash.

    How much for the Custom Deluxe 10 emblems?
  18. custodian

    Auxiliary Battery Tray

    I know this post has wandered from the battery tray, but I'll still buy one if I can find it.
  19. custodian

    Auxiliary Battery Tray

    This is what I decided to do, I left the long leg like it was, drilled a 1/4" hole just above it, used an existing hole where the jack would be mounted. I'll use that mounting hole on the long leg as a place to tether the MAF sensor wire.
  20. custodian

    Auxiliary Battery Tray

    I can always move it if I have too. I'll be heating up the longer leg to get it to mold to the fender.
  21. custodian

    Auxiliary Battery Tray

    Never mind, as soon as I lifted the hood I knew where to mount it.
  22. custodian

    Auxiliary Battery Tray

    K. I found one that looked similar on Ebay for a Silverado. Also, how did you mount the coolant tank, I received mine today.
  23. custodian

    Auxiliary Battery Tray

    What brand is the cold air intake, part number?
  24. custodian

    OUCH!

    Yea, not sure what happened when I posted. I tried to go back and delete them but couldn't.
  25. custodian

    OUCH!

    That's what I was going to do. This was a 5 1/2" vise. So far, I took it to Lowe's Hardware because they sell Craftsman Tools and refused to replace it. They gave me a number to call Craftsman and got a website to file a warranty claim. Just waiting now.

Latest posts

Forum statistics

Threads
45,571
Posts
986,634
Members
38,664
Latest member
wilson79
Top