Search results

  1. CoggedBelt75

    Auto to Manual Tilt Column Modification

    Might try this....
  2. CoggedBelt75

    Days of My Youth

    Actually still have hair, just receding in the front. Never wore a cap so it's full on top. Length is a thing of the past tho. Close cropped with no hassles. She's still here too. Some hassles here and there tho;)
  3. CoggedBelt75

    Days of My Youth

    And to all the old codgers of my generation that reads this, start up a thread and show us what you had.
  4. CoggedBelt75

    Days of My Youth

    In memory of the one car I wish I still had and hoping she is still pounding the streets somewhere But I still got to hang on to this a bit longer Until life finally caught up with us. So fast forward thru the family life. Kids are gone and have their family thing going. We have got...
  5. CoggedBelt75

    Days of My Youth

    Another goodie showed up so it was time to pull the engine out of the Chevelle. Once all the other stuff needed to fill the engine bay was acquired, in it went. Of course the pic is really lousy here. A local racer had a "bulletproof" Turbo 350 for sale so I got that and drove it around...
  6. CoggedBelt75

    Days of My Youth

    I came across this a few weeks later Time to take the floor pan out from the back of the seats to the back panel Rookie with a chisel, hammer and grinder, what could go wrong? Looks worse than it really was. just punctured my forehead on a jagged piece of metal, but I had to have a little...
  7. CoggedBelt75

    Days of My Youth

    After our recent move, I was going thru boxes of pictures and found a bunch of old photos that brought out all the good times I had in the old day. Yeah, the 1900's. Ah, the 70's and 80's. Well, the 70's mostly. Photos of drag cars of the era and my old rides. If only we had a camera in our...
  8. CoggedBelt75

    Post your hood scoops!

    Funny you mentioned that. That’s what’s parked behind it.
  9. CoggedBelt75

    Is a Spark Plug...a Spark Plug??

    Must be a mistype. Never heard of a gas engine producing that kind of compression. Even if they could, it wouldn’t be with flat top pistons and sure not on pump gas. Diesels do make those numbers, but that a total different animal. Myself, I would go with either plug, run them a bit, and pull...
  10. CoggedBelt75

    Post your hood scoops!

    How about a blast from my past. My old Vega that got me around back in the mid 70’s. Snorkels were the thing around here
  11. CoggedBelt75

    Is a Spark Plug...a Spark Plug??

    I’ll throw another penny in the pot. That topic is still being debated with no set answers. Performance wise, a projected tip burns cleaner and exposes more spark because it is “projected” just past the last thread in the plug hole. But because it is further into the combustion chamber, it can...
  12. CoggedBelt75

    Is a Spark Plug...a Spark Plug??

    Sbc would use ngk 7516, heat range 5. Not sure why you were recommended to run 8’s. That’s a pretty cold plug. Because of the blower, I have to run 1-2 ranges colder than stock so I run ngk ur6 7773. Tried 7’s but they didn’t burn as clean. I’m also running Hookers and have no clearance issues...
  13. CoggedBelt75

    Spark plug gap

    Anyone know the correct gap for the drain plug? Didn’t bother searching for the answer since I know I’ll get a quick and timely response
  14. CoggedBelt75

    Post your hood scoops!

    Electronic bug catcher before the ecu took a dump Shotgun scoop now on carbs
  15. CoggedBelt75

    Wide stance

    Howdy Bucket, been awhile!
  16. CoggedBelt75

    Wide stance

    Is this a lowered or lifted truck? If lifted, this may help for specs. https://www.customwheeloffset.com/wheel-offset-gallery/1984/wheel-offset-1982-chevrolet-c10 1/2 ton p/u 2wd-super-aggressive-3-suspension-and-or-body-lift-9-custom-rims On a lowered or stock height one, unless you’re...
  17. CoggedBelt75

    New member from pa

    Welcome William. I'm liking the color.
  18. CoggedBelt75

    New Guy from Indiana

    Welcome Shannon. Be sure and post some pics when you can.
  19. CoggedBelt75

    Hi From Australia

    Nice!! Welcome to the site. More pics are a must.
  20. CoggedBelt75

    Hi from Bs. As. - Argentina

    Here's a couple of places you can try. Might be easier to use their contact us button and send them an email for what you are looking for instead of searching by year and make. Either way, maybe they will help get what you are looking for or recommend someone else...
  21. CoggedBelt75

    Is 28"x17"x1.25" radiator OK for mild 350?

    I just had mine repaired last month. I almost went with an O'reilly radiator but opted to stay with the old copper and bass one. One of the tanks and a tube was seeping and several fins closed up from our giant grasshopper impacts. The leaks were soldered, the core rodded out, the fins combed...
  22. CoggedBelt75

    '80 c10

    Welcome to the site. Going to be a nice swap. The procharger will make things fun!
  23. CoggedBelt75

    Is 28"x17"x1.25" radiator OK for mild 350?

    That's the same dimension factory radiator that's in my truck. No heater hoses run to it either. Only difference is my tranny is cooled thru the radiator. And I have an electric instead of a mechanical fan. I have had no issues keeping my 383 with a 671 cooled (the roots adds a lot more heat)...
  24. CoggedBelt75

    Hi from Bs. As. - Argentina

    Cool links Franco! In US dollars, how much are used C10 trucks in decent shape costing over there?
  25. CoggedBelt75

    Hi from Bs. As. - Argentina

    Nice truck Franco!! Welcome to the site. The only thing I see wrong.....not enough pictures:). Open the hood, throw the doors open, and show us more of your truck. I find the bed cover hold downs interesting but can't tell too much about them from the picture. I haven't seen a setup like that...

Latest posts

Forum statistics

Threads
45,570
Posts
986,561
Members
38,662
Latest member
imyourhuckberry
Top