Search results

  1. R

    Leaf Spring Torque

    So, I installed before reading your post. I tightened everything up while still on the jack stands. I ran it about 2.5 miles since. Waiting to get front end aligned as I had the whole front end done as well. Now that it is on the ground should I loosen things up a bit and re tighten?
  2. R

    Leaf Spring Torque

    I got them from General Spring. Am quite happy with them. Made a huge difference in the way my truck rides. My stock 40 year old ones had 4 leafs. I got ones with 5. Just got them in yesterday so will see how it goes.
  3. R

    Leaf Spring Torque

    I have a 1984 GMC half ton 2wd. I am replacing the leaf springs and shackles. Going to use new bolts and u bolts. Have searched for Torque values but can't find any. Any help would be appreciated.
  4. R

    700R4 Information Thread

    Looks like the 3/16 plate and a couple new holes is going to be the way to go.
  5. R

    Chrome Headlight Bezels

    I was planning on getting the chrome grill from LMC
  6. R

    Chrome Headlight Bezels

    I have an 84 GMC half ton with dual headlights. I'm trying to locate some chrome headlight bezels. LMC has them for the 84 Chevy but do not list them for GMC. Does anyone know where I can purchase a set? I've looked all over with no luck.
  7. R

    TEMP AND VOLT GUAGES NOT WORKING

    After buying new gauges, the volt gauge now works. I checked and there is voltage on the two clips at the gauge cluster. The other clip that goes to the sending unit has continuity to the connector that attaches to the sending unit. If I ground the wire that attaches to the sending unit the...
  8. R

    TEMP AND VOLT GUAGES NOT WORKING

    I have two gauges not working. Temp and volt gauge. Both have 12 volts on the clips in the gauge cluster. I took the volt gauge and applied 12 volts directly from the battery to the two posts that are supposed to be used and no luck. If i move one of the wires(I forget which one) to the post...
  9. R

    700R4 Information Thread

    I just purchased a 1984 GMC half ton 2wd. It has a rebuilt 350 and what I believe is a 700R4. Number on the side is 4YP00B. My question is about the cross member holding the transmission up. I noticed today that it does not run straight across. It is **** eyed. I took the bolts loose to try and...
  10. R

    Vent window repair

    Thank you Sir. Excellent video. probably a good thing I watched it. I learned a couple things.
  11. R

    Wiper washer motor replacement. Who you buying from?

    Just replaced mine the other day along with the linkage. Mine were very slow. Got the motor with pump from LMC. Working great now. Time will tell if its a good product but I am satisfied so far
  12. R

    Vent window repair

    I’m replacing one of my vent window frames on my 84 GMC as the pivot rod is broken. There is some kind of hinge holding the window to the truck. There is a flared rivet holding it together. I can get this rivet out ok. When I put in a new rivet, how do I flare it? Is there a specific tool for...

Latest posts

Forum statistics

Threads
45,567
Posts
986,428
Members
38,656
Latest member
Corncob
Top