Search results

  1. hoagster

    Help finding a part, new or used

    Looking for the beauty ring that goes around the Steering column and sits against the instrument panel.
  2. hoagster

    Getting quotes for paint/body work

    I'm sure there are others, Eastwood is one! National tool wharehouse is were I get most of my consumables and paint gun supplies
  3. hoagster

    Getting quotes for paint/body work

    Tamco
  4. hoagster

    Advice Needed Please!

    This is why I suggested the bug bombs. This was on the bed rail after doing just that in my garage. This was the biggest one of six that we found. Along with others that weren't poisonous!
  5. hoagster

    Advice Needed Please!

    My thoughts too, thats the first thing I would do is clean out the bed and cab, figure out what parts are there and clean it up. If it been outside for 10 years I put about 4 bug bombs in the garage with the truck first!! I think you'll be stoked to work on it even more once you get 10 years...
  6. hoagster

    Getting quotes for paint/body work

    I got a 24K quote from a shop That I stopped by while I was moving my cab that I had completely stripped with a sand blaster. I had just retired and decided I can learn to paint for that much. I have spent approx. $2500 on consumables, primer, base color and clear paint. If you have a good...
  7. hoagster

    FNG from Sacramento

    Welcome, 130 miles north of you! Nice ride.
  8. hoagster

    What have you done to your square lately??

    T Yeah worst part is from Flagstaff to the California boarder! I drove it earlier in the year.
  9. hoagster

    What have you done to your square lately??

    Thanks guys! that thing would rattle bad I knew something had to go in there.
  10. hoagster

    Fender and Hood panel fitment

    Not a one person job!! and take the lock pins out of the equation. little bit at a time you get it!
  11. hoagster

    What have you done to your square lately??

    maybe after the seat gets installed, but I would usually throw them out the slider into the bed
  12. hoagster

    What have you done to your square lately??

    Finished the interior wiring harness, except for some cleanup, need help from anyone that has a 73-75 Square. Putting things back together and didn't take any pictures on this area. Need to know if there is a spacer, rubber gromet for the E-Brake lever. If someone can take a picture of that...
  13. hoagster

    What have you done to your square lately??

    Got all my pedals in and now I'm working on the wiring mess but after looking at diagrams it really wasn't a mess. Only one 2 pin plug that I couldn't figure out light green think it maybe the dash speaker plug? Only need to fix the oem radio connections and the fuel tank level that was...
  14. hoagster

    86 K10 5.3 swap

    I'm getting ready to connect my LM7, I was wondering if you still have your pin outs to the factory fuse box still, my truck is a 73 so alot of things are not on my fuse box. I only have, a few connections to get the motor running. Starter sol, inginition, full time 12v, Fuel pump (which) is not...
  15. hoagster

    Does anybody know what this is for??

    My guess is it's for a wire harness clamp for the transmission signals. Neutral, reverse etc. Just forward of that on the firewall is another bendable clamp.
  16. hoagster

    What have you done to your square lately??

    @CalSgt saved some money and got a refurbished Brake Booster from Nampa! We'll see, bonus it was painted the right color Bought these about 3 years ago took me a minute to find them. (beauty rings) Now do I by something to blind people or put the old lamps in! Thinking going with blind because...
  17. hoagster

    Steering slop

    Jeep steering rod updgrade question why only 77 and up years, what is different that it's not applicable to all years?
  18. hoagster

    What have you done to your square lately??

    Thanks I will try again, I did have needle nose pliers. I'll have to try again at that point I was getting frustrated and something was going to get broken.
  19. hoagster

    Frame welded, dangerous?

    Well, do what you need to do, I saw 3 different trucks based on mirrors and body trim!
  20. hoagster

    Frame welded, dangerous?

    Didn't see that before I posted! Is that on the driver's side, I'm assuming yes! Post a picture of your square. Especially if it is lifted we want to see it.
  21. hoagster

    Frame welded, dangerous?

    Just clean it up and see! Like others said all that snarf is or isn't hiding things. Get a wire wheel and go after it. If it looks ugly on both sides worry about if not put some paint on it and press on.
  22. hoagster

    What have you done to your square lately??

    Few things everyday, some of this I fixed rebuilt and/or bought a long time ago. Got the new gas pedal and the extended wire harness. So that was my focus today all the pedals. one question to the masses is how the hell do you install the clip that holds the Parking Brake release lever to the...
  23. hoagster

    What have you done to your square lately??

    Slowly putting things together, Vintage A/C lines, E- brake pedal assy., Core support, and finally figured out the right serpentine belt for the Holley high mount A/C bracket.
  24. hoagster

    LS swap

    Thanks guys, I found what I needed, they make a pedal now C=10 OBS that bolts right up, and you can also get a 72 inch harness so you can mount the tac module with the ECM.
  25. hoagster

    What new tools have you got lately?

    Ok I thought I'll just get a step drill bit and punch holes in the firewall for the new A/C! No the engineers think those holes need to be 2" and 1 1/8", Step drill is not going to get it! My new favorite tool. 10 ton Harbour Frieght Hole punch set Thru the firewall, Dynamat and the OEM fire...

Latest posts

Forum statistics

Threads
45,566
Posts
986,368
Members
38,654
Latest member
boarder421
Top