Search results

  1. AyWoSch Motors

    15X7 or 15X8 5 Lug Rally Rims

    I have a set of 4, repainted, with caps and rings that were for sale for a while
  2. AyWoSch Motors

    Tools for trip

    I think there's a thread on where a bunch of us all are. Like a help map.
  3. AyWoSch Motors

    15X7 Rims

    You can put just about any size tire on a 15 in rim. Biggest I've seen in person were 40 inch tires. I personally run 31x10.50R15s and 33x12.50R15s on my squares with 15x7s. 235/75s are equivalent to a 29in I think, pretty small.. All depends on what your truck can support. What type of square...
  4. AyWoSch Motors

    Need a inline fuel pump for Carbed 350, what brand/ part?

    Oh nice! No problem, glad ya like em.
  5. AyWoSch Motors

    Need help deciding

    2 of the tires on my K20 were 285/75s. You sould be fine
  6. AyWoSch Motors

    Should i fix the TBI or go to carb? And what's this wire?

    Oh okay, didnt know that part. Well I can tell you its defiantly fuel hose, meant for gas, but it is not FI hose. But this pump willonly put out a max of 8 psi, i dont think thatll cause an issue. Ill look tomorrow though
  7. AyWoSch Motors

    Scores from DIY Parts Yards, Pull A Part, U Pull It etc

    Grabbed these today off a 80s C30 dually and vavale covers off a minisquare. Gauge cluster, gauge bezel and peices, mint set of dumbo mirrors with glass, a busted grill with a good emblem i needed, dual headlight blinker pods, one sidemarker, nice rain gutters, a hood latch i desperately...
  8. AyWoSch Motors

    Fuel injection emblem?

    Picked this up today..
  9. AyWoSch Motors

    Should i fix the TBI or go to carb? And what's this wire?

    Society of Automotive Engineers i believe. Aka the American measuring system, apposed to the Metric system.
  10. AyWoSch Motors

    Should i fix the TBI or go to carb? And what's this wire?

    Im not too worried about the lines or filter rubbing, but thats not a bad idea. I do have some armor casing that fits that size line well, ill probabaly put over it. The filter i change every year or 2, so no worries on that, but i might make a hold down. 3/8s on all. Factory metal fuel line...
  11. AyWoSch Motors

    Tools for trip

    Haha, yup. Thats what my dad always called them, so that what i use. Ive said to a few of my friends before "you have a Stillson wrench?" They look at me like i have 4 heads "a what?" They always say. My one friend doesnt even get pipe wrench when i simplify it, he calls it a Monkey wrench...
  12. AyWoSch Motors

    Tools for trip

    Id say you buy all of that at a parts store there when you get there. When you get back home, return it all, or atleast what you didnt use. If you go with a chain store like O'Reilly or autozone, you can retrun at any other store around the country. If you dont need any of it after the trip...
  13. AyWoSch Motors

    Tools for trip

    I got my "go bags" that go everywhere with me. 1 is my Channel lock brand mechanic's tool kits (1/2, 3/8s, 1/4, sockets amd ratchets, wratcheting box ends, screw driver and tips), and the other is my actual bag. In it i have, large and small flat head and Phillips head screwdrivers, hammer, wise...
  14. AyWoSch Motors

    Should i fix the TBI or go to carb? And what's this wire?

    Thanks. Might try to do that.
  15. AyWoSch Motors

    Should i fix the TBI or go to carb? And what's this wire?

    Okay, got everything hooked up and bolted down, whatcha think? See any issues with that? Also found almost the exact same pump in my carb cabinet, works too. So im going to keep that in the glovebox as extra.
  16. AyWoSch Motors

    Should i fix the TBI or go to carb? And what's this wire?

    Haha, yeah i know. I have a 2ft piece of 2.5in pipe, and a 2.5in glasspack muffler.
  17. AyWoSch Motors

    Should i fix the TBI or go to carb? And what's this wire?

    Plan on getting rid of the cat. Can get $80 for it at the scrapyard. We dont have emissions, i got rid of all the EGR stuff, got rid of the air pump, and breather tubes, and o2 sensors, and all that crap.
  18. AyWoSch Motors

    Should i fix the TBI or go to carb? And what's this wire?

    This truck has a massive cat, a huge muffler, and then another cat or resonator or something after, and then a bunch of rotted, twisted tail pipe at the end. I plan on removing all that, and installing a nice clean straight pipe with a smaller nicer muffler out back more. When i do, ill make...
  19. AyWoSch Motors

    What have you done to your square lately??

    Got the new front clip on, and the grill, bezels, trim, and pieces too. Looks way better than it did, i like it. Got everything in the engine bay done and hooked up too, ready to run once i get the pump wired in..
  20. AyWoSch Motors

    What have you done to your square lately??

    Good job. I got a soltution to all your problems... Step 1 remove TBI: Step 2 install carburetor: Problem solved, hahaha
  21. AyWoSch Motors

    Should i fix the TBI or go to carb? And what's this wire?

    So i did just go and look up some tips and tricks. What im getting from all what you posted and what i looked up, the pump should be the lowest thing in the system, because it hates to pull, but likes to push. Is that correct? Going off that, hows this? I went out and looked underneath, and...
  22. AyWoSch Motors

    Should i fix the TBI or go to carb? And what's this wire?

    No worries man, your good, no offense taken with anything. You're just trying to help, and thanks for that. Im trying to get all that drilled into my thick skull.. My brain clams up a bit when related to anything "electrical". I perfer mechanical, but oh well, here we are.
  23. AyWoSch Motors

    Should i fix the TBI or go to carb? And what's this wire?

    I like that idea, that makes sense. I try to copy that. Ill crawl under it tomorrow, and how free the inside of the framerail is. I might even try to make a little weather proof box that everything can go in. Ill make sure to post my final setup, before final install, see what you all...
  24. AyWoSch Motors

    Should i fix the TBI or go to carb? And what's this wire?

    Thanks. Thats what i was getting at, haha. Trying my best here.
  25. AyWoSch Motors

    Need help deciding

    Congratulations, good pick. Im sure you'll be happy with it. I know a guy in Georgia thats been looking for a GMT400 burb for a long time now. What year and mode, and how much?

Latest posts

Forum statistics

Threads
48,668
Posts
1,074,246
Members
43,339
Latest member
Jeremy89
Top