Search results

  1. Craig Nedrow

    New For Me 1985 Silverado 20 6.2 Diesel

    More done on the C20, Here is the RedArc brake controller install: First you need to remove the dash pad which I don't show as it is easy. Here is a tip that helped me a bunch, When you are removing the instruments, first remove the Bezel, then take the exposed screws out of the black plastic...
  2. Craig Nedrow

    Ignition timing

    Good advice here. I adjusted my 454 advanced until under a big load it would start to ping, pre ignite, on the gas I used, in this instance farm delivered 87. I ended up at 36 degrees advance, where a loaded 10000 lb trailer with my foot in it did not preignite. W/o the trailer it was a tire...
  3. Craig Nedrow

    Want to swap my 6.2 hard to start

    https://www.gmsquarebody.com/threads/new-for-me-1985-silverado-20-6-2-diesel.32359/page-8 Go here, it was what I did to my 6.2 to make it reliable, with pics and part numbers, and easy to do. Two years in and love this truck/motor combo.
  4. Craig Nedrow

    Tremec TR-4050 swap

    Advanced adapters makes a 32 spline input with the big bearing for the 205, which will adapt it to th400, 4l80e, which will go behind my 489BB. The adapter bolts to the back of the 4l80e from the t- case. However the early case,(which I have) needs to have the input side of the case bored out to...
  5. Craig Nedrow

    Novice restoration on ‘72 c10. Launch code activated!

    I know this suggestion is expensive, but American auto wire has a great harness. Most everything I build gets a new harness, no electrical problems is a Huge step, thank me later.
  6. Craig Nedrow

    I'm new guy!

    When the motor is out, spend the time to paint, keep it from rusting and easier to clean and makes you happy every time you get in there.
  7. Craig Nedrow

    1977 Black Truck Tan Interior???

    Thats really nice Mike, and the dash is great
  8. Craig Nedrow

    New For Me 1985 Silverado 20 6.2 Diesel

    I would sure appreciate that Greg, didn't know there were so many little things in this swap...
  9. Craig Nedrow

    New For Me 1985 Silverado 20 6.2 Diesel

    The trans was from a sq-body, but I will check it out today, which is cool, and crisp, but sunny. We have snow coming next week, so finishing up the outside chores. Thanks Ricko.
  10. Craig Nedrow

    New For Me 1985 Silverado 20 6.2 Diesel

    Thanks Blue Ox, I did not know that, Have to go see what I can find out.....
  11. Craig Nedrow

    Fall Barrette Jackson Auction

    Vic had a 10 disc changer in the car, 50's-70's music, and asked me if I wanted to here them, so great. Never heard one song the whole trip, as we were turning 4000-4500 RPM the whole way and it was loud. 1305 miles in 21 hours. Car ran great.
  12. Craig Nedrow

    New For Me 1985 Silverado 20 6.2 Diesel

    I found a 700r,208 transfer on Market place, just down the road, so just got home with it. I am going to put the trans in my 85, which is the last mod I want to do on this truck, make it a real cruiser. 208 seems good, and the guy I bought seemed very honest, and he is a mechanic. Need to get a...
  13. Craig Nedrow

    Fall Barrette Jackson Auction

    Well Vic did ok on the Camaro, $31,000, of which $2800~ goes to BJ. It was a fun trip, and I did get to ride in Dodges on a little drifting track. Overall had a good time and got to meet up with my Niece which was super. I was pleasantly surprised by everyone's attitude, very upbeat, staff was...
  14. Craig Nedrow

    Fall Barrette Jackson Auction

    The 71 Camaro we drove down had one just like that.
  15. Craig Nedrow

    Fall Barrette Jackson Auction

    He’s a nice Squarebody for you LS fans, thinking if totallyhuckef
  16. Craig Nedrow

    Fall Barrette Jackson Auction

    Well, I figure this is the car for Perry, what do you guys think?
  17. Craig Nedrow

    Fall Barrette Jackson Auction

    If there’s any one out there that would like pictures of anything on a Squarebody truck or any other rig pm and I’ll see what I can do
  18. Craig Nedrow

    Fall Barrette Jackson Auction

    Well, I made it down to Scottsdale first day of the auction is today. I was there last night at the party ton of really cool cars so I will be posting pictures, but this is especially for Perry, Idahovette. I found him the perfect rig. I’ll be posting those pictures tonight if you want to see...
  19. Craig Nedrow

    Did I ruin this pinion bearing?

    I have an old electric skillet. I use it all the time put it on 350. Do what you did pinion the freezer. It won’t hurt and it will drop right on however, if you want to press it and you don’t have to press, you could always use a piece of pipe about the same inside diameter as the outside...
  20. Craig Nedrow

    Factory Engine Color???

    What I used.
  21. Craig Nedrow

    Should I go POSI???

    I have lots in the 12.5 version as well, poor TA are toast. you can here a chunk of tire come loose when I shift from second to third.
  22. Craig Nedrow

    dash speaker brackets

    You'll need those CL, iffin you are running a 496.
  23. Craig Nedrow

    2 Hooker vr304 stainless mufflers 2.5”

    I have hooker 3" Aerochamber, sound low but a little loud whin your are in the throttle, which, in my opinion is great.
  24. Craig Nedrow

    Amazon special/ Led Headlights

    Have used Aux in several internment clusters, and they are dimmable, and last, been in several years, and going strong. Appreciate the info.
  25. Craig Nedrow

    Should I go POSI???

    I used a Yukon Lunchbox locker, and like it. Mine was a FF14 10.5 open diff, so easy to change out and done in a day. However I live in the hills in central Commie Wa St. and my driveway can be a challenge in the winter, yeah we get a fair amount of snow up here. I do have a write up on the...

Latest posts

Forum statistics

Threads
48,668
Posts
1,074,246
Members
43,339
Latest member
Jeremy89
Top