Search results

  1. Selo

    73-87 (91) Fleetside Tailgate Mechanism Repair

    My 1984 C10 tailgate mechanism was to the point where opening and closing the tailgate was difficult and I was beginning to bend the handle. Using this thread for inspiration......I removed left and right latches and the handle mechanism. All parts were basically OK but the handle was difficult...
  2. Selo

    73-87 (91) Fleetside Tailgate Mechanism Repair

    HotRodPC, I know this is an old thread, but am sending a thanks for this info in case the message gets to you. Very helpful and very appreciated. Selo
  3. Selo

    My 87 GMC Longbed

    Welcome from up 68 in Stokesdale. Nice looking truck. If it does not have AC I can help you when you get to working on the heater. Just went through mine. At first I thought you meant you had a manual 3 speed. My 1984 is 250 I6 with 3 on the tree. Selo
  4. Selo

    Heater refurb question

    These are the screw bolts and u-nuts I mentioned in previous post.
  5. Selo

    Heater refurb question

    Update. I've been ordering parts and cleaning up the heater parts. Spending money like I have it! I've ordered and received: Heater motor and core, (O'Reilly). Resistor. (LMC) Passenger side, inner fender. (PartsGeek) Front and rear splash guards for both sides. (LMC). Once I removed the...
  6. Selo

    Heater refurb question

    Hey MikeB, Took your advice and checked with O'Reilly Auto. They had exactly what I needed and no vent hole etc. Comes with the fan wheel. Shipped to my home at no charge. Shakes my confidence in LMC. So I looked at O'Reilly heater cores and ordered that too. Murray Heat Transfer Heater...
  7. Selo

    Heater refurb question

    Hi Dougbert, Appreciate your wanting to help, but it is a non-AC heater so hose would have nowhere to go! Dmack, Great idea to get lube into the cable housing. I may do exactly that, but probably will use liquid silicone lube. MikeB, I gave up on the freakin bolt and took the fender well...
  8. Selo

    Heater refurb question

    chengny, Excellent information and much I needed to know to find a part. I assumed the two non-AC clamps were the same. The one at the inlet and outlet end of the core is the one corroded in two on my heater. I am having difficulty finding part-out trucks that are non-AC. Just like the 3...
  9. Selo

    Heater refurb question

    Bruce, Maybe the mice were arming themselves! Yeah mine too was packed with rat bedding infused with the aroma of mouse pee and poop. Selo
  10. Selo

    Heater refurb question

    chengny, I took the cables off of the control module last night. Interesting that one cable showed no kinks or bends, but when I had it off the module could move the cable wire and feel an abnormal bend in the wire inside the cable cover. I straightened that as best I could and the cable works...
  11. Selo

    Heater refurb question

    chengny, I will definitely remove cables from control module to test. You are correct in thinking I was making the assumption the cables did not "slide" well because if I tried to make them move by pushing or pulling the end while still connected to the module, they don't move well. So I will...
  12. Selo

    Heater refurb question

    To my advisers! Cables for my non-AC heater do not seem to be available as repros, have any of you fellows ever lubricated heater control cables? I'm planning to use silicone grease on the Temp Control Assembly after if clean it up. Selo
  13. Selo

    Heater refurb question

    chengny, Great idea. and yes I do have the air handler out etc and can get to the screw threads inside the cab. Putting it back using the tape idea great as well. Thank you Bruce, wouldn't you know I have ONE fender well bolt down below the fan housing that is spinning. I've go to decide...
  14. Selo

    Heater refurb question

    Not a bad idea, but I'm too far in now! I'll keep that suggestion in reserve however. Thanks, Selo
  15. Selo

    Heater refurb question

    Hey I'm with you both because I tried that. I can get a 1/4 in socket with swivel to the bolt, I just can't get my fingers in there to guide it onto the bolt head. Also the swivel allows the socket to drift down. Without my fingers in there can't get it on the bolt. I really don't see how I'd...
  16. Selo

    Heater refurb question

    I am refurbishing a 1984 I6 three on the tree. The truck has the standard heater and does not have AC. The heater unit was full of mouse nest and riding in the truck without the fan on was unpleasant due to smell. Also control levers don't work well. The core needs replacing and fan wheel has...
  17. Selo

    C10 250ci 6cyl carburetor ID

    Hi Bucket, Thank you for your reply. It is a Rochester Model 2SE Varajet 2 barrel. I have made a start on the vacuum lines. It seems to have helped the acceleration stumble some. I did not imagine how unattainable the vacuum diagram was until I tried to find it online and in the service...
  18. Selo

    Brake lights always on

    Hey Peats is the accelerator pump difficult to service. The FSM doesn't seem to cover it. Selo
  19. Selo

    C10 250ci 6cyl carburetor ID

    Thanks, I figured it out
  20. Selo

    250 ci carb ID

    No worries, I figured it out.
  21. Selo

    250 ci carb ID

    Can anyone tell me the exact model of this carb on my 1984 C10 250 ci. I would very appreciate the help. Thank you, Selo
  22. Selo

    C10 250ci 6cyl carburetor ID

    Working to get my 1984 C10 3 on the tree manual back to reliable daily driver. FYI just had my steering column professionally rebuilt. Installed it with rebuilt gear box, new ps lines and new intermediate shaft. All good. The truck starts easily. The issue is when I start off or when I...
  23. Selo

    Three on tree and steering refurbish

    Thanks for all the help and advice. I have the rebuilt gear box installed with a Borgeson intermediate shaft and my rebuilt column with three speed manual column shift. Steers and shifts like a new truck. I replaced the PS lines and so once installed put about a quart of new fluid in. Plan...
  24. Selo

    Brake lights always on

    peats, I will do just that. Thank you.
  25. Selo

    Brake lights always on

    You guys are too funny.

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,338
Latest member
jw23655
Top