Search results

  1. Keith Seymore

    Decode a partial VIN??? Confirm it’s a K10?

    F = 1985 model year F = Flint 408437 = serial portion of VIN
  2. Keith Seymore

    6 lug rims?

    Yah - that's a miss relative to the artwork. No 5 lug 4wd squares. K
  3. Keith Seymore

    Craziest antitheft idea yet.

    Nah. I can still drag it up into my car trailer even if the wheels don't roll. Did it with my daughter's Cruze after it had been sitting a while and the park brake was stuck on. K
  4. Keith Seymore

    Have i decoded this VIN correctly????

    Your photos are nice, too! ;)
  5. Keith Seymore

    Have i decoded this VIN correctly????

    This might be a good time to describe how the VINs were stamped in the factory. As I mentioned, I (briefly) ran the area on the Chassis Line - I think as a summer student. The VIN stamper is a large hydraulic "press" hanging from a tool rail and with the weight offset by a "balancer" (imagine...
  6. Keith Seymore

    Have i decoded this VIN correctly????

    Beautiful photo. Thanks for posting. Must be a Chevy nameplated '78 built in Flint. K
  7. Keith Seymore

    1986 K20 Scottsdale 4x4 5.7L 350 3-Speed Manual w/ Carb

    Three on the tree? Or "three speed" on the floor with the granny creeper gear? K
  8. Keith Seymore

    Rear wheels are sucked in way more than front. K10. Adapters? BAD IDEA? pics inside

    Correct - it's the internal program code. It went GMT400, then GMT800, then GMT900, then K2 (maybe) and then I don't remember - seems like there was a "T1" in there somewhere. What might not be obvious is you can then build additional information into the program code, like GMT820 = short...
  9. Keith Seymore

    Have i decoded this VIN correctly????

    Post a photo if it is convenient. I used to be the foreman on the line where they were stamped. I think you'll find the VIN is on top and there are supplier marks, date codes and part number on the side. K
  10. Keith Seymore

    Ring and Pinion Numbers Mystery

    This is correct. K
  11. Keith Seymore

    Have i decoded this VIN correctly????

    Yes. Sounds like you might have a Frankenstein on your hands. K
  12. Keith Seymore

    Have i decoded this VIN correctly????

    '82 VIN card. We used to carry these around in our pockets. I don't know why. I guess if we had a particularly bothersome VIN we needed to decode while in the bathroom or something. 2GCEC14C1 = 2 = Canadian built G = General Motors C = Chevrolet E= 6000-7000 GVW C= conventional cab 1= 1/2...
  13. Keith Seymore

    Have i decoded this VIN correctly????

    2GCEC14C1C1216200 Ok - so the serial portion of the VIN is the last six digits: 216200. The "1" in the space prior to that is for the Oshawa assembly plant The "C" in front of that is for the 1982 model year (ie, A= 1980, B=1981, C=1982). That's all from memory. Give me a sec to find a...
  14. Keith Seymore

    Have i decoded this VIN correctly????

    Not on the side; top of the top flange only. You would need a mirror to see it. K
  15. Keith Seymore

    Rear wheels are sucked in way more than front. K10. Adapters? BAD IDEA? pics inside

    I've heard that too. K
  16. Keith Seymore

    Rear wheels are sucked in way more than front. K10. Adapters? BAD IDEA? pics inside

    Nope. The change was made years before the lawsuit(s). Be reminded it takes 3-4 years for a minor redo; 8-10 years for a major architectural redesign. K
  17. Keith Seymore

    Rear wheels are sucked in way more than front. K10. Adapters? BAD IDEA? pics inside

    Thank you - I did feel like I had to get that off my chest, nonetheless, for posterity. K
  18. Keith Seymore

    Rear wheels are sucked in way more than front. K10. Adapters? BAD IDEA? pics inside

    I feel like I should share this at some point: I've been accused of making it sound like I was "everywhere all at once" back then and I don't want it to give that impression. I've been thinking about writing a thread about "How I got so Smart", or something like that, but in a nutshell: it's...
  19. Keith Seymore

    Rear wheels are sucked in way more than front. K10. Adapters? BAD IDEA? pics inside

    Here's the thing about doing different generations of vehicles: When the current version came out it was billed as the greatest thing since sliced bread. So any change you make as a manufacturer has to be "better" than before. And then better again. And then better yet again. At best - It's...
  20. Keith Seymore

    Rear wheels are sucked in way more than front. K10. Adapters? BAD IDEA? pics inside

    This actually happens alot. My beloved bride - who knows everything (just ask her) and I were driving on Phoenix's Apache Trail up to Roosevelt Dam. It's miles and miles of dirt road and was pretty dusty, so I reached down and put the HVAC system on "max" so it would recirc the inside air...
  21. Keith Seymore

    Rear wheels are sucked in way more than front. K10. Adapters? BAD IDEA? pics inside

    I know the guy. Ed Pauly was the suspension engineer for the squarebody trucks. We lived in the same small town during our time on the program, so we had a lot of nice visits. I'm not speculating. If I was I would say so, but a lot of squarebody history I don't have to speculate on (like...
  22. Keith Seymore

    Rear wheels are sucked in way more than front. K10. Adapters? BAD IDEA? pics inside

    It was for traction, so that the front tires and rear tires were tracking in fresh material (snow or sand). K
  23. Keith Seymore

    Roof lights

    RPO U01 is correct. They were a free flow option on any truck, but required on any vehicle over 80 inches wide. So - required on duallys and some K30 single wheels (because the front hubs would stick out past the 80 inches). K
  24. Keith Seymore

    Front End Sheet Metal Assembly

    Fender. K
  25. Keith Seymore

    1982 GMC - What do I have? What can I tow?

    We used to carry these around in our pocket: LINK:https://gsitlc.ext.gm.com/dealerworld/vincards/ I agree that the VIN provided checks out for a 82 3/4 ton GMC, K truck, built in Flint. K

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,339
Latest member
wonone
Top